I have an Alix 2c1 (3/1/128/LX700) (0.99B firmware) board running m0n0wall 1.3b10 and it is
The system doesn't actually reboot on it's own, it is triggered by logging into the web interface,
after the authentication is passed, the web browser does not show the web interface it just hangs,
the firewall stops responding to pings. When ping responses return, I retry access to the web
interface and see that the uptime is 0:00.
When the system has been up for a few days (1 - 5) I notice that some systems on my network aren't
able to reach the Internet anymore so I try to access the web interface to see if there are any
problems, and get the above symptoms/results.
I have tried the same config on two separate boards running the same version of m0n0wall with both
having the same problem.
My last reload was this morning at 7:34 AM (per uptime and internal logs on router)
I have captured the syslog logs, however they don't appear to be very helpful (You can look at those
at http://maya.stir.org/smokey-200804-07.log )
I have captured the on device logs from the system log tab
I have also captured and sanitized (I hope not making it too unreadable) the status.php
I have a total of 5 pcs and 10 - 15 other devices that may access the Internet.
I use one machine to pull SNMP network statistics from devices outside the firewall (approx. 200
devices) and also use that same machine as a public DNS server, so it gets and makes quite a few
WAN interface has a static public IP address. (I also have a second public IP that I use via proxy
LAN I do not run a DHCP server from monowall (provided by an internal server)
Opt 1 runs a DHCP server for a Wireless network
Opt 2 is the same network as WAN, however has a different IP address (you will notice messages in
the logs stating that ARP requests are comming back from the wrong interfaces). I do this as I need
the public network to perform the SNMP monitoring.
IPSEC1 is disabled.
The second IPSEC tunnel is to a m0n0 pc running 1.22
The third IPSEC tunnel is to an m0n0 running on an Alix 2c1 version 1.3b10
Any ideas on why this box is rebooting?
If there is any more information that would be helpful let me know and I will provide what I can.
Thanks for any help.