Nevermind, I gave up and reflashed the card and reloaded the older config.

I think the update firmware didn't go so well and the firewall didn't come
up properly.  However, I didn't see any indication on the console something
was wrong, things were just really really realy slow.

/sylikc


On 4/9/08, sylikc <sylikc at gmail dot com> wrote:
>
> Hi,
>
> My beta firmware upgrade caused the m0n0wall box to lock up and no traffic
> is being let through.  I try to use the webGUI but it's unusably slow.  I
> have to click a link, wait about 5 minutes for it to load, etc.
>
> It's as if the processor is capped, but the status page doesn't show
> that.  Anyhow, the webGUI is so slow that I am unable to upload a new
> firmware.
>
> What's the best way to recover from this situation?  Is there a way to
> reload the firmware without wiping the configuration?  Sure, I have a
> backup, but I'd prefer the current config.
>
> Anyhow, is anyone else experiencing lockups with 1.3b11?
>
> /sylikc
>
>
>  On 4/7/08, Christopher M. Iarocci <iarocci at eastendsc dot com> wrote:
> >
> > Manuel Kasper wrote:
> >
> > > Hello,
> > >
> > > m0n0wall beta version 1.3b11 has just been released with the following
> > > changes/fixes:
> > >
> > > - fixed IPsec to prefer new SAs over old SAs by default (should solve
> > > problems with tunnels not working after an interruption or peer IP address
> > > change)
> > >
> > > - added DPD (Dead Peer Detection) option to IPsec tunnels (default off
> > > as before)
> > >
> > > - added asn1dn option to IPsec identifier types to be compatible with
> > > what Openswan expects when using certs instead of PSKs (contributed by Wes
> > > Morgan)
> > >
> > > - fixed SVG traffic/CPU graphs under IE7 (by Daniel S. Haischt)
> > >
> > > Detailed change log and downloads:
> > >
> > > http://m0n0.ch/wall/beta.php
> > >
> > > In other news, m0n0.ch will be moved to a new server over the next
> > > couple of days; I'll try to keep the downtime to a minimum, but it's still
> > > possible that some things (like the mailing list) won't work for a short
> > > while, so don't be surprised. :)
> > >
> > > Regards,
> > >
> > > Manuel
> > >
> > Woohoo...... my VPN tunnels to Cisco routers no longer die.
> >
> > Chris
> >
> >
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> >
> >
>