[ previous ] [ next ] [ threads ]
 From:  Jim Thompson <jim at netgate dot com>
 To:  "John Stoffel" <john at stoffel dot org>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Two SSIDs in a single AP with m0n0wall?
 Date:  Fri, 8 Aug 2008 04:06:13 -1000
the freebsd work for VAPs has never been released into HEAD, much less  
6.2, where the current version of m0n0wall lives.

you could run openwrt and put the VAPs in different VLANs, then use  
m0n0walls VLAN support to route between them and
whatever you're using for upstream.


On Aug 8, 2008, at 4:00 AM, John Stoffel wrote:

> Hi guys,
> I'm wondering if what I want to do is actually possible.  I've got
> m0n0wall running on a WRAP board.  I've got my WAN side, LAN side and
> Wireless ports setup.
> I'd like to setup my AP (on the Wireless port) to have two SSIDs, one
> for public access which is locked down, and the other with WPA enabled
> so I can share more of my LAN resources to laptops around the house.
> I've got a WRT54G which I think I could put dd-wrt or openwrt on to
> semi support this, but I assume I'd need help from m0n0wall to break
> the address range of each SSID into it's own network block and
> route/firewall them differently.
> Ideally I'd like not to buy more hardware, if only because it would
> mean running more wires, though I guess I could put a switch on my
> TiVo's cable and run the WPA(2) AP on that subnet.
> Is what I want possible?
> Thanks,
> John
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch