On Friday 08 August 2008 21:06:13 Jim Thompson wrote:
> the freebsd work for VAPs has never been released into HEAD, much less
> 6.2, where the current version of m0n0wall lives.
>
> you could run openwrt and put the VAPs in different VLANs, then use
Well thats not completely true VAP code is now in CURRENT

> m0n0walls VLAN support to route between them and
> whatever you're using for upstream.
>
> Jim
>
> On Aug 8, 2008, at 4:00 AM, John Stoffel wrote:
> > Hi guys,
> >
> > I'm wondering if what I want to do is actually possible.  I've got
> > m0n0wall running on a WRAP board.  I've got my WAN side, LAN side and
> > Wireless ports setup.
> >
> > I'd like to setup my AP (on the Wireless port) to have two SSIDs, one
> > for public access which is locked down, and the other with WPA enabled
> > so I can share more of my LAN resources to laptops around the house.
> >
> > I've got a WRT54G which I think I could put dd-wrt or openwrt on to
> > semi support this, but I assume I'd need help from m0n0wall to break
> > the address range of each SSID into it's own network block and
> > route/firewall them differently.
> >
> > Ideally I'd like not to buy more hardware, if only because it would
> > mean running more wires, though I guess I could put a switch on my
> > TiVo's cable and run the WPA(2) AP on that subnet.
> >
> > Is what I want possible?
> >
> >
> >
> > Thanks,
> > John
> >
> > ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch