|
||||||||||
Steve, I don't think there is such a thing as IPv6 NAT. I have a Monowall 1.3b16 running so I could perhaps help in that area. EJ > -----Oorspronkelijk bericht----- > Van: Steve Bertrand [mailto:steve at ibctech dot ca] > Verzonden: dinsdag 14 april 2009 22:39 > Aan: Michel Servaes > CC: m0n0wall at lists dot m0n0 dot ch >> M0n0wall Mailing List > Onderwerp: Re: [m0n0wall] how do we check, that ipv6 is > actually working (OT again) > > > Michel Servaes wrote: > > Routed /48: 2001:470:d39d::/48 > > Routed /64: 2001:470:1f15:158c::/64 > > > > > > This is the config, I got from tunnelbroker.net > > But I have not configured the routed /48 part on my side at > all. (the > > /48 part was optional at tunnelbroker.net) > > Ok. This tells me that you have the m0n0wall NAT'ing IPv6 then. > > Does the m0n0 have the capability to route IPv6 between the > LAN interface and the tunnel interface? > > If your WAN (tunnel) interface is: > > 2001:470:1f15:158c::/64 > > Then as a test, assign: > > 2001:470:d39d:1::1/64 to the LAN interface, and configure a PC within: > > 2001:470:d39d:1::/64 > > I don't have any m0n0walls in use right now, so unfortunately > I can't provide any assistance with it's configuration. > > > I'll try to setup Sixxs again, since they have a Windows > Client too - > > that way I can try in between the office, and my home. At > the office I > > don't have a monowall yet (have to wait 60 days, before I start > > working there :) - and am not going to do experiments at > my current > > job) > > Ahhh, I see... > > > Thank you for your testing though... but since I'm > completely new to > > ipv6, I don't want to take your time too much ;) > > Not a problem at all... if you were taking too much of my > time, you would know this by a lack of response ;) > > Steve > > --------------------------------------------------------------------- > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > |