|
||||||||||
Michel, did the tunnel brooker give you a specific address? I would expect that they told you to configure 2001:470:1f15:158c::1 or 2 on your WAN interface. I tried pinging those but they do not respond. On my Monowall: traceroute6 to 2001:470:1f15:158c::2 (2001:470:1f15:158c::2) from 2a02:968:1000:3::2, 18 hops max, 12 byte packets 1 2a02:968:1000:3::1 12.033 ms 11.339 ms 11.826 ms (My WAN port tunnel address) 2 gateway-bit-vlan-45.hobby.nl 12.387 ms 13.297 ms 12.584 ms 3 815.xe-1-0-0.jun1.kelvin.network.bit.nl 12.650 ms 12.612 ms 11.879 ms 4 linx.he.net 20.282 ms 20.906 ms 20.184 ms 5 10gigabitethernet1-1.core1.ams1.he.net 21.084 ms 25.753 ms 25.129 ms 6 1g-bge0.tserv11.ams1.ipv6.he.net 24.043 ms 23.408 ms 23.378 ms 7 * * * This stops earlier than I expected. There seems no route to Michels tunnelnetwork... EJ > -----Oorspronkelijk bericht----- > Van: Steve Bertrand [mailto:steve at ibctech dot ca] > Verzonden: dinsdag 14 april 2009 22:39 > Aan: Michel Servaes > CC: m0n0wall at lists dot m0n0 dot ch >> M0n0wall Mailing List > Onderwerp: Re: [m0n0wall] how do we check, that ipv6 is > actually working (OT again) > > > Michel Servaes wrote: > > Routed /48: 2001:470:d39d::/48 > > Routed /64: 2001:470:1f15:158c::/64 > > > > > > This is the config, I got from tunnelbroker.net > > But I have not configured the routed /48 part on my side at > all. (the > > /48 part was optional at tunnelbroker.net) > > Ok. This tells me that you have the m0n0wall NAT'ing IPv6 then. > > Does the m0n0 have the capability to route IPv6 between the > LAN interface and the tunnel interface? > > If your WAN (tunnel) interface is: > > 2001:470:1f15:158c::/64 > > Then as a test, assign: > > 2001:470:d39d:1::1/64 to the LAN interface, and configure a PC within: > > 2001:470:d39d:1::/64 > > I don't have any m0n0walls in use right now, so unfortunately > I can't provide any assistance with it's configuration. > > > I'll try to setup Sixxs again, since they have a Windows > Client too - > > that way I can try in between the office, and my home. At > the office I > > don't have a monowall yet (have to wait 60 days, before I start > > working there :) - and am not going to do experiments at > my current > > job) > > Ahhh, I see... > > > Thank you for your testing though... but since I'm > completely new to > > ipv6, I don't want to take your time too much ;) > > Not a problem at all... if you were taking too much of my > time, you would know this by a lack of response ;) > > Steve > > --------------------------------------------------------------------- > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch > > |