|
||||||||
Hello Support I am experiencing some problems with my infrastructure. Basically for some reason all the devices stop sending traffic. Let me explain my config. I have the soekris then a have a poe switch and then I have some AP's. I am monitoring all of those devices thru SNMPC program. But for some reason devices stop responding but I always have access to soekris. If I check the ARP table there is nothing in there. I thought it was the equipments so I reboot them no luck. So I what I do is reboot soekris and everything start responding again. I have the latest firmware and sokeris net5501 . Any ideas? Thank you I really appreciate your help Here is are the logs on the system Jun 30 08:11:52 /kernel: too many stray irq 7's; not logging any more Jun 30 08:11:52 /kernel: stray irq 7 Jun 30 08:09:19 /kernel: stray irq 7 Jun 30 08:08:08 /kernel: stray irq 7 Jun 30 08:07:08 /kernel: stray irq 7 Jun 30 05:08:03 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ Jun 30 05:08:03 dhcpd: All rights reserved. Jun 30 05:08:03 dhcpd: Copyright 2004-2006 Internet Systems Consortium. Jun 30 05:08:03 dhcpd: Internet Systems Consortium DHCP Server V3.0.5 Jun 30 05:08:03 dnsmasq[102]: read /etc/hosts - 2 addresses Jun 30 05:08:03 dnsmasq[102]: using nameserver 66.146.160.12#53 Jun 30 05:08:03 dnsmasq[102]: reading /etc/resolv.conf Jun 30 05:08:03 dnsmasq[102]: setting --bind-interfaces option because of OS limitations Jun 30 05:08:03 dnsmasq[102]: setting --bind-interfaces option because of OS limitations Jun 30 05:08:03 dnsmasq[102]: compile time options: IPv6 no-GNU-getopt BSD-bridge ISC-leasefile no-DBus no-I18N no-TFTP Jun 30 05:08:03 dnsmasq[102]: started, version 2.45 cachesize 150 Jun 30 05:08:03 /kernel: Mounting root from ufs:/dev/md0c Jun 30 05:08:03 /kernel: ad0: 3919MB <SanDisk SDCFH2-004G> [7964/16/63] at ata0-master PIO4 Jun 30 05:08:03 /kernel: IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled Jun 30 05:08:03 /kernel: IPsec: Initialized Security Association Processing. Jun 30 05:08:03 /kernel: BRIDGE 020214 loaded Jun 30 05:08:03 /kernel: sio1: type 16550A Jun 30 05:08:03 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Jun 30 05:08:03 /kernel: sio0: type 16550A, console Jun 30 05:08:03 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jun 30 05:08:03 /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jun 30 05:08:03 /kernel: fdc0: cmd 3 failed at out byte 1 of 3 Jun 30 05:08:03 /kernel: fdc0: ready for input in output Jun 30 05:08:03 /kernel: pmtimer0 on isa0 Jun 30 05:08:03 /kernel: orm0: <Option ROM> at iomem 0xc8000-0xd27ff on isa0 Jun 30 05:08:03 /kernel: pci0: <USB controller> at 21.1 irq 15 Jun 30 05:08:03 /kernel: uhub0: 4 ports with 4 removable, self powered Jun 30 05:08:03 /kernel: uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jun 30 05:08:03 /kernel: usb0: USB revision 1.0 Jun 30 05:08:03 /kernel: usb0: <OHCI (generic) USB controller> on ohci0 Jun 30 05:08:03 /kernel: usb0: OHCI version 1.0, legacy support Jun 30 05:08:03 /kernel: ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0 Jun 30 05:08:03 /kernel: ata1: at 0x170 irq 15 on atapci0 Jun 30 05:08:03 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jun 30 05:08:03 /kernel: atapci0: <Generic PCI ATA controller> port 0xe000-0xe00f at device 20.2 on pci0 Jun 30 05:08:03 /kernel: isa0: <ISA bus> on isab0 Jun 30 05:08:03 /kernel: isab0: <PCI to ISA bridge (vendor=1022 device=2090)> port 0x6200-0x63ff,0x6100-0x61ff,0x6000-0x7fff at device 20.0 on pci0 Jun 30 05:08:03 /kernel: ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jun 30 05:08:03 /kernel: ukphy3: <Generic IEEE 802.3u media interface> on miibus3 Jun 30 05:08:03 /kernel: miibus3: <MII bus> on vr3 Jun 30 05:08:03 /kernel: vr3: Ethernet address: 00:00:24:cb:eb:87 Jun 30 05:08:03 /kernel: vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0 Jun 30 05:08:03 /kernel: ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jun 30 05:08:03 /kernel: ukphy2: <Generic IEEE 802.3u media interface> on miibus2 Jun 30 05:08:03 /kernel: miibus2: <MII bus> on vr2 ***** Jul 1 07:20:48 /kernel: arplookup 169.254.229.62 failed: host is not on local network Jun 30 21:20:14 /kernel: arplookup 169.254.229.62 failed: host is not on local network Jun 30 15:04:55 /kernel: arplookup 169.254.229.62 failed: host is not on local network Jun 30 14:56:06 /kernel: DUMMYNET initialized (011031) Jun 30 14:56:06 /kernel: ipfw2 initialized, divert disabled, rule-based forwarding enabled, default to accept, logging disabled Jun 30 14:56:05 dhcpd: For info, please visit http://www.isc.org/sw/dhcp/ Jun 30 14:56:05 dhcpd: All rights reserved. Jun 30 14:56:05 dhcpd: Copyright 2004-2006 Internet Systems Consortium. Jun 30 14:56:05 dnsmasq[106]: read /etc/hosts - 2 addresses Jun 30 14:56:05 dhcpd: Internet Systems Consortium DHCP Server V3.0.5 Jun 30 14:56:05 dnsmasq[106]: using nameserver 68.105.28.13#53 Jun 30 14:56:05 dnsmasq[106]: using nameserver 68.105.29.13#53 Jun 30 14:56:05 dnsmasq[106]: reading /etc/resolv.conf Jun 30 14:56:05 dnsmasq[106]: setting --bind-interfaces option because of OS limitations Jun 30 14:56:05 dnsmasq[106]: setting --bind-interfaces option because of OS limitations Jun 30 14:56:05 dnsmasq[106]: compile time options: IPv6 no-GNU-getopt BSD-bridge ISC-leasefile no-DBus no-I18N no-TFTP Jun 30 14:56:05 dnsmasq[106]: started, version 2.45 cachesize 150 Jun 30 14:56:05 /kernel: Mounting root from ufs:/dev/md0c Jun 30 14:56:05 /kernel: ad1: 967MB <CF CARD 1GB> [1966/16/63] at ata0-slave PIO4 Jun 30 14:56:05 /kernel: IP Filter: v3.4.35 initialized. Default = block all, Logging = enabled Jun 30 14:56:05 /kernel: IPsec: Initialized Security Association Processing. Jun 30 14:56:05 /kernel: BRIDGE 020214 loaded Jun 30 14:56:05 /kernel: sio1: type 16550A Jun 30 14:56:05 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Jun 30 14:56:05 /kernel: sio0: type 16550A, console Jun 30 14:56:05 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Jun 30 14:56:05 /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Jun 30 14:56:05 /kernel: fdc0: cmd 3 failed at out byte 1 of 3 Jun 30 14:56:05 /kernel: fdc0: ready for input in output Jun 30 14:56:05 /kernel: pmtimer0 on isa0 Jun 30 14:56:05 /kernel: orm0: <Option ROM> at iomem 0xc8000-0xd27ff on isa0 Jun 30 14:56:05 /kernel: pci0: <USB controller> at 21.1 irq 15 Jun 30 14:56:05 /kernel: uhub0: 4 ports with 4 removable, self powered Jun 30 14:56:05 /kernel: uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 Jun 30 14:56:05 /kernel: usb0: USB revision 1.0 Jun 30 14:56:05 /kernel: usb0: <OHCI (generic) USB controller> on ohci0 Jun 30 14:56:05 /kernel: usb0: OHCI version 1.0, legacy support Jun 30 14:56:05 /kernel: ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0 Jun 30 14:56:05 /kernel: ata1: at 0x170 irq 15 on atapci0 Jun 30 14:56:05 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Jun 30 14:56:05 /kernel: atapci0: <Generic PCI ATA controller> port 0xe000-0xe00f at device 20.2 on pci0 Jun 30 14:56:05 /kernel: isa0: <ISA bus> on isab0 Jun 30 14:56:05 /kernel: isab0: <PCI to ISA bridge (vendor=1022 device=2090)> port 0x6200-0x63ff,0x6100-0x61ff,0x6000-0x7fff at device 20.0 on pci0 Jun 30 14:56:05 /kernel: ukphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jun 30 14:56:05 /kernel: ukphy3: <Generic IEEE 802.3u media interface> on miibus3 Jun 30 14:56:05 /kernel: miibus3: <MII bus> on vr3 Jun 30 14:56:05 /kernel: vr3: Ethernet address: 00:00:24:c9:5f:17 Jun 30 14:56:05 /kernel: vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0 Jun 30 14:56:05 /kernel: ukphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Jun 30 14:56:05 /kernel: ukphy2: <Generic IEEE 802.3u media interface> on miibus2 ******************************************************************* Jessica Aguilar Technical Support - Tier 2 Lead Skyriver Communications www.skyriver.net <http://www.skyriver.net/> Phone: 858-812-5280 Tech Support Office Hours: M-F 7:00AM - 7:00PM PST S-S 9:00AM - 6:00PM PST How am I doing? Email our VP of Customer Ops HMorales at skyriver dot net <mailto:HMorales at skyriver dot net> with any feedback. Thank You. |