[ previous ] [ next ] [ threads ]
 
 From:  "Jessica Aguilar" <jaguilar at skyriver dot net>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  ARP errors
 Date:  Wed, 1 Jul 2009 10:30:37 -0700
Hello Support

 

I am experiencing some problems with my infrastructure.   Basically for
some reason all the devices stop sending traffic.   Let me explain my
config. I have the soekris then a have a poe switch and then I have some
AP's.  I am monitoring all of those devices thru SNMPC program.    But
for some reason  devices stop responding  but I always have access to
soekris. If I check the ARP table there is nothing in there.

 

I thought it was the equipments so I reboot them no luck.  So I what I
do is reboot soekris and everything start responding again.   I have the
latest firmware and sokeris net5501 . 

 

Any ideas? 

 

Thank you  I really appreciate your help

 

Here is are the logs  on the system

 

Jun 30 08:11:52 /kernel: too many stray irq 7's; not logging any more 

Jun 30 08:11:52 /kernel: stray irq 7 

Jun 30 08:09:19 /kernel: stray irq 7 

Jun 30 08:08:08 /kernel: stray irq 7 

Jun 30 08:07:08 /kernel: stray irq 7 

Jun 30 05:08:03 dhcpd: For info, please visit
http://www.isc.org/sw/dhcp/ 

Jun 30 05:08:03 dhcpd: All rights reserved. 

Jun 30 05:08:03 dhcpd: Copyright 2004-2006 Internet Systems Consortium. 

Jun 30 05:08:03 dhcpd: Internet Systems Consortium DHCP Server V3.0.5 

Jun 30 05:08:03 dnsmasq[102]: read /etc/hosts - 2 addresses 

Jun 30 05:08:03 dnsmasq[102]: using nameserver 66.146.160.12#53 

Jun 30 05:08:03 dnsmasq[102]: reading /etc/resolv.conf 

Jun 30 05:08:03 dnsmasq[102]: setting --bind-interfaces option because
of OS limitations 

Jun 30 05:08:03 dnsmasq[102]: setting --bind-interfaces option because
of OS limitations 

Jun 30 05:08:03 dnsmasq[102]: compile time options: IPv6 no-GNU-getopt
BSD-bridge ISC-leasefile no-DBus no-I18N no-TFTP 

Jun 30 05:08:03 dnsmasq[102]: started, version 2.45 cachesize 150 

Jun 30 05:08:03 /kernel: Mounting root from ufs:/dev/md0c 

Jun 30 05:08:03 /kernel: ad0: 3919MB <SanDisk SDCFH2-004G> [7964/16/63]
at ata0-master PIO4 

Jun 30 05:08:03 /kernel: IP Filter: v3.4.35 initialized. Default = block
all, Logging = enabled 

Jun 30 05:08:03 /kernel: IPsec: Initialized Security Association
Processing. 

Jun 30 05:08:03 /kernel: BRIDGE 020214 loaded 

Jun 30 05:08:03 /kernel: sio1: type 16550A 

Jun 30 05:08:03 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 

Jun 30 05:08:03 /kernel: sio0: type 16550A, console 

Jun 30 05:08:03 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on
isa0 

Jun 30 05:08:03 /kernel: atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0 

Jun 30 05:08:03 /kernel: fdc0: cmd 3 failed at out byte 1 of 3 

Jun 30 05:08:03 /kernel: fdc0: ready for input in output 

Jun 30 05:08:03 /kernel: pmtimer0 on isa0 

Jun 30 05:08:03 /kernel: orm0: <Option ROM> at iomem 0xc8000-0xd27ff on
isa0 

Jun 30 05:08:03 /kernel: pci0: <USB controller> at 21.1 irq 15 

Jun 30 05:08:03 /kernel: uhub0: 4 ports with 4 removable, self powered 

Jun 30 05:08:03 /kernel: uhub0: AMD OHCI root hub, class 9/0, rev
1.00/1.00, addr 1 

Jun 30 05:08:03 /kernel: usb0: USB revision 1.0 

Jun 30 05:08:03 /kernel: usb0: <OHCI (generic) USB controller> on ohci0 

Jun 30 05:08:03 /kernel: usb0: OHCI version 1.0, legacy support 

Jun 30 05:08:03 /kernel: ohci0: <OHCI (generic) USB controller> mem
0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0 

Jun 30 05:08:03 /kernel: ata1: at 0x170 irq 15 on atapci0 

Jun 30 05:08:03 /kernel: ata0: at 0x1f0 irq 14 on atapci0 

Jun 30 05:08:03 /kernel: atapci0: <Generic PCI ATA controller> port
0xe000-0xe00f at device 20.2 on pci0 

Jun 30 05:08:03 /kernel: isa0: <ISA bus> on isab0 

Jun 30 05:08:03 /kernel: isab0: <PCI to ISA bridge (vendor=1022
device=2090)> port 0x6200-0x63ff,0x6100-0x61ff,0x6000-0x7fff at device
20.0 on pci0 

Jun 30 05:08:03 /kernel: ukphy3: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto 

Jun 30 05:08:03 /kernel: ukphy3: <Generic IEEE 802.3u media interface>
on miibus3 

Jun 30 05:08:03 /kernel: miibus3: <MII bus> on vr3 

Jun 30 05:08:03 /kernel: vr3: Ethernet address: 00:00:24:cb:eb:87 

Jun 30 05:08:03 /kernel: vr3: <VIA VT6105M Rhine III 10/100BaseTX> port
0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0 

Jun 30 05:08:03 /kernel: ukphy2: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto 

Jun 30 05:08:03 /kernel: ukphy2: <Generic IEEE 802.3u media interface>
on miibus2 

Jun 30 05:08:03 /kernel: miibus2: <MII bus> on vr2 

 

 

*****

Jul 1 07:20:48 /kernel: arplookup 169.254.229.62 failed: host is not on
local network 

Jun 30 21:20:14 /kernel: arplookup 169.254.229.62 failed: host is not on
local network 

Jun 30 15:04:55 /kernel: arplookup 169.254.229.62 failed: host is not on
local network 

Jun 30 14:56:06 /kernel: DUMMYNET initialized (011031) 

Jun 30 14:56:06 /kernel: ipfw2 initialized, divert disabled, rule-based
forwarding enabled, default to accept, logging disabled 

Jun 30 14:56:05 dhcpd: For info, please visit
http://www.isc.org/sw/dhcp/ 

Jun 30 14:56:05 dhcpd: All rights reserved. 

Jun 30 14:56:05 dhcpd: Copyright 2004-2006 Internet Systems Consortium. 

Jun 30 14:56:05 dnsmasq[106]: read /etc/hosts - 2 addresses 

Jun 30 14:56:05 dhcpd: Internet Systems Consortium DHCP Server V3.0.5 

Jun 30 14:56:05 dnsmasq[106]: using nameserver 68.105.28.13#53 

Jun 30 14:56:05 dnsmasq[106]: using nameserver 68.105.29.13#53 

Jun 30 14:56:05 dnsmasq[106]: reading /etc/resolv.conf 

Jun 30 14:56:05 dnsmasq[106]: setting --bind-interfaces option because
of OS limitations 

Jun 30 14:56:05 dnsmasq[106]: setting --bind-interfaces option because
of OS limitations 

Jun 30 14:56:05 dnsmasq[106]: compile time options: IPv6 no-GNU-getopt
BSD-bridge ISC-leasefile no-DBus no-I18N no-TFTP 

Jun 30 14:56:05 dnsmasq[106]: started, version 2.45 cachesize 150 

Jun 30 14:56:05 /kernel: Mounting root from ufs:/dev/md0c 

Jun 30 14:56:05 /kernel: ad1: 967MB <CF CARD 1GB> [1966/16/63] at
ata0-slave PIO4 

Jun 30 14:56:05 /kernel: IP Filter: v3.4.35 initialized. Default = block
all, Logging = enabled 

Jun 30 14:56:05 /kernel: IPsec: Initialized Security Association
Processing. 

Jun 30 14:56:05 /kernel: BRIDGE 020214 loaded 

Jun 30 14:56:05 /kernel: sio1: type 16550A 

Jun 30 14:56:05 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 

Jun 30 14:56:05 /kernel: sio0: type 16550A, console 

Jun 30 14:56:05 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on
isa0 

Jun 30 14:56:05 /kernel: atkbdc0: <Keyboard controller (i8042)> at port
0x60,0x64 on isa0 

Jun 30 14:56:05 /kernel: fdc0: cmd 3 failed at out byte 1 of 3 

Jun 30 14:56:05 /kernel: fdc0: ready for input in output 

Jun 30 14:56:05 /kernel: pmtimer0 on isa0 

Jun 30 14:56:05 /kernel: orm0: <Option ROM> at iomem 0xc8000-0xd27ff on
isa0 

Jun 30 14:56:05 /kernel: pci0: <USB controller> at 21.1 irq 15 

Jun 30 14:56:05 /kernel: uhub0: 4 ports with 4 removable, self powered 

Jun 30 14:56:05 /kernel: uhub0: AMD OHCI root hub, class 9/0, rev
1.00/1.00, addr 1 

Jun 30 14:56:05 /kernel: usb0: USB revision 1.0 

Jun 30 14:56:05 /kernel: usb0: <OHCI (generic) USB controller> on ohci0 

Jun 30 14:56:05 /kernel: usb0: OHCI version 1.0, legacy support 

Jun 30 14:56:05 /kernel: ohci0: <OHCI (generic) USB controller> mem
0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0 

Jun 30 14:56:05 /kernel: ata1: at 0x170 irq 15 on atapci0 

Jun 30 14:56:05 /kernel: ata0: at 0x1f0 irq 14 on atapci0 

Jun 30 14:56:05 /kernel: atapci0: <Generic PCI ATA controller> port
0xe000-0xe00f at device 20.2 on pci0 

Jun 30 14:56:05 /kernel: isa0: <ISA bus> on isab0 

Jun 30 14:56:05 /kernel: isab0: <PCI to ISA bridge (vendor=1022
device=2090)> port 0x6200-0x63ff,0x6100-0x61ff,0x6000-0x7fff at device
20.0 on pci0 

Jun 30 14:56:05 /kernel: ukphy3: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto 

Jun 30 14:56:05 /kernel: ukphy3: <Generic IEEE 802.3u media interface>
on miibus3 

Jun 30 14:56:05 /kernel: miibus3: <MII bus> on vr3 

Jun 30 14:56:05 /kernel: vr3: Ethernet address: 00:00:24:c9:5f:17 

Jun 30 14:56:05 /kernel: vr3: <VIA VT6105M Rhine III 10/100BaseTX> port
0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at device 9.0 on pci0 

Jun 30 14:56:05 /kernel: ukphy2: 10baseT, 10baseT-FDX, 100baseTX,
100baseTX-FDX, auto 

Jun 30 14:56:05 /kernel: ukphy2: <Generic IEEE 802.3u media interface>
on miibus2

 

*******************************************************************

Jessica Aguilar

Technical Support - Tier 2 Lead

Skyriver Communications

www.skyriver.net <http://www.skyriver.net/> 

Phone: 858-812-5280

 

Tech Support Office Hours: 

M-F      7:00AM - 7:00PM PST

S-S       9:00AM - 6:00PM PST

How am I doing? Email our VP of Customer Ops HMorales at skyriver dot net
<mailto:HMorales at skyriver dot net>  with any feedback. 

Thank You.