|
||||||||
OK - at this point I have gotten the .img file loaded on the CF card - the unit booted but halted and indicated that the device containing the config.xml file could not be found. Still looking -----Original Message----- From: David Johnson [mailto:David dot Johnson at immedion dot com] Sent: Tuesday, August 25, 2009 11:57 AM To: Lee Sharp; m0n0wall at lists dot m0n0 dot ch Subject: RE: [m0n0wall] Nexcom NSA 1083 Failing to boot.......may have been the way I was imaging the CF card Used my intel mac first - now trying with RHEL4.....will see how that goes. I have been through the BIOS settings and think I have everything correct. I will update after I try the generic image. Thanks -----Original Message----- From: Lee Sharp [mailto:leesharp at hal dash pc dot org] Sent: Tuesday, August 25, 2009 11:51 AM To: m0n0wall at lists dot m0n0 dot ch Subject: Re: [m0n0wall] Nexcom NSA 1083 David Johnson wrote: > We have a NSA 1083 appliance laying around and I would like to load m0n0wall on the box - but many tries have been unsuccessful > > Which version should I be attempting to load? > > This unit has only a CF card - 256MB but I can install a 2.5 or 3.5 inch HDD if necessary - just would prefer to use the CF...... > > Any advice will be appreciated! Generic PC on the CF should work. What problems are you having? Lee --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |