|
||||||||
Nope, that card will not work, I talked to Manual a few days ago about it. There is no support for any of the "G" WIC's at this time in monowall. I just returned one of these and exchanged it for a B type. Netgate is nice and easy to deal with for a return however. Dave -----Original Message----- From: Alex Sandini [mailto:asandini at blue dash chip dot be] Sent: Sunday, February 22, 2004 3:34 PM To: m0n0wall at lists dot m0n0 dot ch Subject: [m0n0wall] netgate 5354 ARIES MP minipci on wrap Hi folks, This card (http://www.netgate.com/5354AriesMP.html) has been recommended to me for the wrap platform. But it actually do not works :-( I have only tried it with m0n0wall, though. Any idea? thx, -- Alex Sandini Blue-Chip Engineering NV Gemeentehuisstraat 1 9402 Meerbeke - Belgium tel +32 (0)54 587 942 fax +32 (0)54 569 647 asandini at blue dash chip dot be Feb 22 15:42:19 /kernel: sis0: <NatSemi DP83815 10/100BaseTX> port 0x1000-0x10ff mem 0x80000000-0x80000fff irq 10 at device 14.0 on pci0 Feb 22 15:42:19 /kernel: sis0: Ethernet address: 00:0d:b9:00:02:dc Feb 22 15:42:19 /kernel: miibus0: <MII bus> on sis0 Feb 22 15:42:19 /kernel: ukphy0: <Generic IEEE 802.3u media interface> on miibus0 Feb 22 15:42:19 /kernel: ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Feb 22 15:42:19 /kernel: sis1: <NatSemi DP83815 10/100BaseTX> port 0x1400-0x14ff mem 0x80040000-0x80040fff irq 11 at device 16.0 on pci0 Feb 22 15:42:19 /kernel: sis1: Ethernet address: 00:0d:b9:00:02:dd Feb 22 15:42:19 /kernel: miibus1: <MII bus> on sis1 Feb 22 15:42:19 /kernel: ukphy1: <Generic IEEE 802.3u media interface> on miibus1 Feb 22 15:42:19 /kernel: ukphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Feb 22 15:42:19 /kernel: pci0: <unknown card> (vendor=0x168c, dev=0x0013) at 17.0 irq 9 Feb 22 15:42:19 /kernel: isab0: <PCI to ISA bridge (vendor=100b device=0510)> port 0xf600-0xf63f,0xf400-0xf43f at device 18.0 on pci0 Feb 22 15:42:19 /kernel: isa0: <ISA bus> on isab0 Feb 22 15:42:19 /kernel: chip1: <PCI to Other bridge (vendor=100b device=0511)> port 0xf000-0xf0ff at device 18.1 on pci0 Feb 22 15:42:19 /kernel: atapci0: <Generic PCI ATA controller> port 0xfc00-0xfc0f at device 18.2 on pci0 Feb 22 15:42:19 /kernel: ata0: at 0x1f0 irq 14 on atapci0 Feb 22 15:42:20 /kernel: pci0: <unknown card> (vendor=0x100b, dev=0x0503) at 18.3 Feb 22 15:42:20 /kernel: chip2: <PCI to Other bridge (vendor=100b device=0515)> port 0xf200-0xf23f at device 18.5 on pci0 Feb 22 15:42:20 /kernel: pmtimer0 on isa0 Feb 22 15:42:20 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0 Feb 22 15:42:20 /kernel: sio0: type 16550A, console Feb 22 15:42:20 /kernel: BRIDGE 020214 loaded Feb 22 15:42:20 /kernel: IPsec: Initialized Security Association Processing. Feb 22 15:42:20 /kernel: IP Filter: v3.4.31 initialized. Default = block all, Logging = enabled Feb 22 15:42:20 /kernel: ad0: 30MB <LEXAR ATA FLASH> [487/4/32] at ata0-master PIO4 Feb 22 15:42:20 /kernel: Mounting root from ufs:/dev/md0c --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |