|
||||||||||
would not the DNS forwarder act as the DNS server saying that test.com is at IP x.x.x.x Ryan Crisman MIS/IT/Webmaster Manager Ten-Tec, Inc. 1185 Dolly Parton Parkway Sevierville TN, 37862 On Wed, Sep 16, 2009 at 4:47 PM, David Kitchens <spider at webweaver dot com>wrote: > If there is no internal DNS to say test.com is at IP x.x.x.x, then no, > apache will only resond to its FQDN which is engfiles.test.com. > > ------------------------------ > *From:* Crisman, Ryan [mailto:rcrisman at tentec dot com] > *Sent:* Wednesday, September 16, 2009 4:36 PM > > *To:* David Kitchens > *Cc:* m0n0wall - > *Subject:* Re: [m0n0wall] DNS forwarder > > Should apache not in its default setting respond to all queries to its IP > rather the domain is engfiles.test.com or test.com. > > the server displays when i type engfiles.test.com and the server is not > even setup with that domain. > > Ryan Crisman > MIS/IT/Webmaster Manager > Ten-Tec, Inc. > 1185 Dolly Parton Parkway > Sevierville TN, 37862 > > > On Wed, Sep 16, 2009 at 4:26 PM, David Kitchens <spider at webweaver dot com>wrote: > >> Ah... well then it sounds like your apache isn't listening on that ip for >> the root domain. The forwarder is not the issue, if engfiles.test.comworks >> which is the FQDN, something else is causing this. >> >> _____ >> >> From: Crisman, Ryan [mailto:rcrisman at tentec dot com] >> Sent: Wednesday, September 16, 2009 4:16 PM >> To: David Kitchens >> Cc: m0n0wall - >> Subject: Re: [m0n0wall] DNS forwarder >> >> >> No I do not own test.com just using it as an example and no this server >> is >> not accessible from outside everything is internal only. >> >> Ryan Crisman >> MIS/IT/Webmaster Manager >> Ten-Tec, Inc. >> 1185 Dolly Parton Parkway >> Sevierville TN, 37862 >> >> >> >> On Wed, Sep 16, 2009 at 3:56 PM, David Kitchens <spider at webweaver dot com> >> wrote: >> >> >> If the engfiles site is on the same server as the main website then this >> is >> not a monowall config issue. I'm going to assume its a linux box for >> example, apache is setup to run on that ip address for all its sites, you >> have mono configured to let http in from outside so test.com is visible, >> when you send an http request from the LAN, it's apache that is sorting >> out >> which site to go to, from the outside, you haven't let engfiles.test.comto >> be allowed. For this to work as you want, you will need to put engfiles on >> a >> different internal ip than test.com and redo your forwarder to point them >> to >> separate ip's. Apache is sitting there and giving you test.com because >> thats >> what was asked for when you really want engfiles.test.com to resolve >> locally >> for the request. They must be on different IP's for that to work, you are >> then spoofing apache, however, your real site will no longer be available >> from inside using test.com, you can add a forward for www.test.com but >> internal clients asking for test will always go to engfiles. >> >> _____ >> >> >> From: Crisman, Ryan [mailto:rcrisman at tentec dot com] >> >> Sent: Wednesday, September 16, 2009 2:52 PM >> >> To: David Kitchens >> Cc: m0n0wall - >> Subject: Re: [m0n0wall] DNS forwarder >> >> >> I made an entry with just the Domain and IP filled out and it still goes >> to >> the website and not the server. >> >> Host Domain IP >> engfiles test.com 192.168.1.107 WORKS!!! >> test.com 192.168.1.107 Does not Work >> >> Ryan Crisman >> MIS/IT/Webmaster Manager >> Ten-Tec, Inc. >> 1185 Dolly Parton Parkway >> Sevierville TN, 37862 >> >> >> >> On Wed, Sep 16, 2009 at 2:41 PM, David Kitchens <spider at webweaver dot com> >> wrote: >> >> >> If you put an entry in the forwarder with nothing in the host field, and >> put >> test.com in domain as you have, it should point test.com to the internal >> ip >> of the server, assuming it is inside the firewall of course. Is >> engfiles.test.com on the same physical box as test.com? You have to have >> an >> entry for every host you want to resolve. >> >> _____ >> >> >> From: Crisman, Ryan [mailto:rcrisman at tentec dot com] >> >> Sent: Wednesday, September 16, 2009 2:30 PM >> >> To: David Kitchens >> Cc: m0n0wall - >> Subject: Re: [m0n0wall] DNS forwarder >> >> >> Okay that works, but is there a way when I type in test.com it goes to >> the >> server and not some website. >> >> Ryan Crisman >> MIS/IT/Webmaster Manager >> Ten-Tec, Inc. >> 1185 Dolly Parton Parkway >> Sevierville TN, 37862 >> >> >> >> On Wed, Sep 16, 2009 at 2:30 PM, David Kitchens <spider at webweaver dot com> >> wrote: >> >> >> What happens if you type in http://engfiles.test.com? That is the address >> you need to have local workstations point to. >> >> >> _____ >> >> >> From: Crisman, Ryan [mailto:rcrisman at tentec dot com] >> >> Sent: Wednesday, September 16, 2009 1:37 PM >> To: David Kitchens >> Cc: m0n0wall - >> >> Subject: Re: [m0n0wall] DNS forwarder >> >> >> This is what i am doing and this is what i see >> >> http://rcrisman.net/test.jpg >> >> the second is test.com >> >> the bottom its what i should see when i type test.com >> >> router is 192.168.1.1 and the DNS address on my computer is 192.168.1.1 >> >> Ryan Crisman >> MIS/IT/Webmaster Manager >> Ten-Tec, Inc. >> 1185 Dolly Parton Parkway >> Sevierville TN, 37862 >> >> >> >> On Wed, Sep 16, 2009 at 12:33 PM, David Kitchens <spider at webweaver dot com> >> wrote: >> >> >> Ryan, >> In the dns forwarder page, the first line is for the hostname, put the >> actual internal server name in the host box, ie:servername. I use the >> forwarder a lot and it works wonderfully but if you just use the domain >> without a hostname things may not work like you expect if you have more >> than >> one host. >> >> Dave >> >> >> -----Original Message----- >> From: Crisman, Ryan [mailto:rcrisman at tentec dot com] >> >> Sent: Wednesday, September 16, 2009 12:01 PM >> To: m0n0wall - >> Subject: Re: [m0n0wall] DNS forwarder >> >> Yes all computers are using the firewall as the DNS server. >> >> Ryan Crisman >> MIS/IT/Webmaster Manager >> Ten-Tec, Inc. >> 1185 Dolly Parton Parkway >> Sevierville TN, 37862 >> >> >> On Wed, Sep 16, 2009 at 11:43 AM, Paul Rae < >> paul at impacttrainingsolutions dot co dot uk> wrote: >> >> > Works fine here, are you sure your clients are using the firewall for >> > their dns? If they are using another dns server then it won't work and >> > you will need to override it there. >> > >> > >> > On 16/09/2009 16:24, "Crisman, Ryan" <rcrisman at tentec dot com> wrote: >> > >> > > I know about that , but when i do put an entry there it does not work. >> > > >> > > Lets say i put in tentec.com and ip of 192.168.1.199 (internal >> > > server) >> > and i >> > > go to the browser and type tentec.com i get our website and not the >> > internal >> > > server. >> > > >> > > Ryan Crisman >> > > MIS/IT/Webmaster Manager >> > > Ten-Tec, Inc. >> > > 1185 Dolly Parton Parkway >> > > Sevierville TN, 37862 >> > > >> > > >> > > On Wed, Sep 16, 2009 at 10:27 AM, Lee Sharp <leesharp at hal dash pc dot org> >> wrote: >> > > >> > >> Crisman, Ryan wrote: >> > >> >> > >>> Okay so we have to modify the hosts files on the computer. Thanks >> > >>> >> > >> >> > >> No, you can do it in the firewall, but in a different part. Up >> > >> above >> > where >> > >> it says "Host Domain IP Description" is where you need to be working. >> > >> >> > >> Lee >> > >> >> > >> >> > >> ------------------------------------------------------------------- >> > >> -- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch >> > >> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch >> > >> >> > >> >> > >> > >> > --------------------------------------------------------------------- >> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch >> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch >> > >> > >> >> >> --------------------------------------------------------------------- >> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch >> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch >> >> >> >> >> >> >> >> >> >> >> >> >> >> > |