Re: [m0n0wall] WAN blocked and should not be

From:	Lee Sharp <leesharp at hal dash pc dot org>
To:	Monowall List <m0n0wall at lists dot m0n0 dot ch>
Subject:	Re: [m0n0wall] WAN blocked and should not be
Date:	Sun, 21 Feb 2010 16:55:13 -0600

Andrew Tillman wrote:
> 
> I am setting up a captive portal and already have in place a hardware
> firewall, so I need the firewall completely disabled. I am only after the
> captive portal service available.
> 
> Setup is:
> Internet
>>> hardware firewall >> switch >> all internal
> devices
> 
> All LAN traffic seems to be fine but WAN traffic is
> being blocked.
> 
> LAN IP = 192.168.11.45
> WAN IP =
> 192.168.11.46

Both IPs are on the same subnet.  Thsi will not work.  Also is NAT 
turned off?

			Lee