NAT is turned off.

Both IPs are on the same subnet because of
the existing internal network. If I just unhook the WAN will captive
portal still work if monowall is plugged into the switch?

Thank
you :)
-- 
Andrew Tillman
Tech Specialist
Lee County
Library
Leesburg, GA 31763
tillman at leecountylibrary dot org

> Andrew Tillman wrote:
>>
>> I am setting up a
captive portal and already have in place a hardware
>>
firewall, so I need the firewall completely disabled. I am only after
>> the
>> captive portal service available.
>>
>> Setup is:
>> Internet
>>>> hardware firewall >> switch >> all
internal
>> devices
>>
>> All LAN traffic
seems to be fine but WAN traffic is
>> being blocked.
>>
>> LAN IP = 192.168.11.45
>> WAN IP =
>> 192.168.11.46
> 
> Both IPs are on the same
subnet.  Thsi will not work.  Also is NAT
> turned off?
>

> 			Lee
> 
>
---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
>