[ previous ] [ next ] [ threads ]
 
 From:  Sameer Rajaram <Sameer dot Rajaram at tridentmicro dot com>
 To:  "m0n0wall at lists dot m0n0 dot ch" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Soekris Router configuration : Interface not getting detected - No link-up detected
 Date:  Mon, 23 Aug 2010 05:55:44 +0200
Hi,

I have a net5501 -60 Soekris router which I need to configure.
I am using the m0n0wall software for configuring the same.

I have followed steps given in monowall startup guide and installed the OS on the 2 GB Sandisk CF
card.

The router boots up and I can see the prompt for its confuguration.

However when the null modem is connected between the LAN port on the router and the laptop port,

the link is not getting detected.

This has blocked accessing the router default ip 192.168.1.1 for further configuration.

The NIC card on my laptop is one of the following I am not sure which one.

Intel (r) PRO/Wireless 2200BG Network Connection or  Broadcom NetXtreme 57xx Gigabit controller

Please help how to resolve this problem of able to make the link up and configure the Soekris router
using the m0nowall.

Attached are the logs.

Thanks
Regards
Sameer
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.4-RELEASE-p5 #0: Sun Apr 11 18:55:29 CEST 2010
    root at mb64 dot neon1 dot net:/usr/src/sys/i386/compile/M0N0WALL_GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (433.25-MHz 586-class CPU)
  Origin = "AuthenticAMD"  Id = 0x5a2  Stepping = 2
  Features=0x88a93d<FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CLFLUSH,MMX>
  AMD Features=0xc0400000<MMX+,3DNow!+,3DNow!>
real memory  = 268435456 (256 MB)
avail memory = 236515328 (225 MB)
wlan: mac acl policy registered
kbd1 at kbdmux0
K6-family MTRR support enabled (2 registers)
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
cpu0 on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <encrypt/decrypt, entertainment crypto> at device 1.2 (no driver attached)
vr0: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe100-0xe1ff mem 0xa0004000-0xa00040ff irq 11 at
device 6.0 on pci0
vr0: Quirks: 0x2
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:00:24:cc:f4:68
vr1: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe200-0xe2ff mem 0xa0004100-0xa00041ff irq 5 at
device 7.0 on pci0
vr1: Quirks: 0x2
miibus1: <MII bus> on vr1
ukphy1: <Generic IEEE 802.3u media interface> on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr1: Ethernet address: 00:00:24:cc:f4:69
vr2: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe300-0xe3ff mem 0xa0004200-0xa00042ff irq 9 at
device 8.0 on pci0
vr2: Quirks: 0x2
miibus2: <MII bus> on vr2
ukphy2: <Generic IEEE 802.3u media interface> on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2: Ethernet address: 00:00:24:cc:f4:6a
vr3: <VIA VT6105M Rhine III 10/100BaseTX> port 0xe400-0xe4ff mem 0xa0004300-0xa00043ff irq 12 at
device 9.0 on pci0
vr3: Quirks: 0x2
miibus3: <MII bus> on vr3
ukphy3: <Generic IEEE 802.3u media interface> on miibus3
ukphy3:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr3: Ethernet address: 00:00:24:cc:f4:6b
isab0: <PCI-ISA bridge> at device 20.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <AMD CS5536 UDMA100 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xe000-0xe00f at
device 20.2 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
ohci0: <OHCI (generic) USB controller> mem 0xa0005000-0xa0005fff irq 15 at device 21.0 on pci0
ohci0: [GIANT-LOCKED]
usb0: OHCI version 1.0, legacy support
usb0: <OHCI (generic) USB controller> on ohci0
usb0: USB revision 1.0
uhub0: AMD OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0: <AMD CS5536 USB 2.0 controller> mem 0xa0006000-0xa0006fff irq 15 at device 21.1 on pci0
ehci0: [GIANT-LOCKED]
usb1: EHCI version 1.0
usb1: companion controller, 4 ports each: usb0
usb1: <AMD CS5536 USB 2.0 controller> on ehci0
usb1: USB revision 2.0
uhub1: AMD EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pmtimer0 on isa0
orm0: <ISA Option ROM> at iomem 0xc8000-0xd27ff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
Timecounter "TSC" frequency 433250298 Hz quality 800
Timecounters tick every 1.000 msec
Fast IPsec: Initialized Security Association Processing.
IP Filter: v4.1.28 initialized.  Default = block all, Logging = enabled
md0: Preloaded image </mfsroot> 16777216 bytes at 0xc0abc3e8
ad0: FAILURE - SET_MULTI status=51<READY,DSC,ERROR> error=4<ABORTED>
ad0: 1918MB <SanDisk SDCFH-002G HDX 5.04> at ata0-master PIO4
Trying to mount root from ufs:/dev/md0
kern.coredump: 1 -> 0
Found configuration on ad0.
Initializing timezone... done
Configuring firewall... done
Configuring LAN interface... done
Configuring WAN interface... done
Starting syslog service... done
Starting webGUI... done
Starting DNS forwarder... done
Starting DHCP service... done
Starting NTP client... done


*** This is m0n0wall, version 1.32
    built on Sat Apr 17 21:02:05 CEST 2010 for generic-pc
    Copyright (C) 2002-2010 by Manuel Kasper. All rights reserved.
    Visit http://m0n0.ch/wall for updates.


    LAN IP address: 192.168.1.1

    Port configuration:

    LAN   -> sis0
    WAN   -> sis1


m0n0wall console setup
**********************
1) Interfaces: assign network ports
2) Set up LAN IP address
3) Reset webGUI password
4) Reset to factory defaults
5) Reboot system
6) Ping host

Enter a number: 1

Valid interfaces are:

vr0     00:00:24:cc:f4:68   (up)   VIA VT6105M Rhine III 10/100BaseTX
vr1     00:00:24:cc:f4:69          VIA VT6105M Rhine III 10/100BaseTX
vr2     00:00:24:cc:f4:6a          VIA VT6105M Rhine III 10/100BaseTX
vr3     00:00:24:cc:f4:6b          VIA VT6105M Rhine III 10/100BaseTX

Do you want to set up VLANs first?
If you're not going to use VLANs, or only for optional interfaces, you
should say no here and use the webGUI to configure VLANs later, if required.

Do you want to set up VLANs now? (y/n) n

If you don't know the names of your interfaces, you may choose to use
auto-detection. In that case, disconnect all interfaces before you begin,
and reconnect each one when prompted to do so.

Enter the LAN interface name or 'a' for auto-detection: a

Connect the LAN interface now and make sure that the link is up.
Then press ENTER to continue.

No link-up detected.

Enter the LAN interface name or 'a' for auto-detection: a

Connect the LAN interface now and make sure that the link is up.
Then press ENTER to continue.