[ previous ] [ next ] [ threads ]
 
 From:  Stefan Wiesinger <stefan at wie dash se dot net>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  mono ip rules
 Date:  Sat, 08 Jan 2011 01:46:20 +0100
hello.

i use mono v1.32 with the following setup. i've already searched the mailing-list archive but found
no suitable answer.

[MONO 10.0.0.138] --PPTPinternetConnection-- [10.0.0.140 modem/internet]
[MONO 10.98.0.254] --interface-- [10.98.0.10 DNS-Server (LAN)]
[MONO 10.99.0.254] --interface-- [10.99.0.1 VPN-Server 10.1.0.1] --VPNconnection-over-the-internet--
[VPN-Client 10.1.0.4]

the vpn-clients are routed from the vpn-server to the rest of the networks.

now i tried to allow the vpn-client to access the dns-server. i defined a fw-rule in den
ipv4-fw-rule for the interface on which the vpn-server is, to
allow any traffic from any ip with destination UDP 53 and IP 10.98.0.10.
when i look into the firewall-rules-log i see that the packets from the vpn-clients are blocked, but
the packets from the vpn-server itself pass -->
why? any ideas?

the routing must be ok, otherwise i wouldn't see the dropped packets in the monowall-webif.

hope anyone can help.

thank's in advance,
stefan wiesinger