[ previous ] [ next ] [ threads ]
 From:  "Barber, Patrick (MCI)" <patrick dot barber dash eds at eds dot com>
 To:  "'m0n0wall at lists dot m0n0 dot ch'" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Access to webGUI using generic-pc-1.0.img -more in fo
 Date:  Fri, 5 Mar 2004 11:10:04 -0000
Yes, the interfaces are assigned, 
Fxp0 - LAN
Fxp1 - WAN
Fxp2 - OPT1

-----Original Message-----
From: Christiaens Joachim [mailto:jchristi at oce dot be] 
Sent: 05 March 2004 10:18
To: 'Barber, Patrick (MCI)'
Cc: 'm0n0wall at lists dot m0n0 dot ch'
Subject: RE: [m0n0wall] Access to webGUI using generic-pc-1.0.img -more in

> -----Original Message-----
> From: Barber, Patrick (MCI) [mailto:patrick dot barber dash eds at eds dot com]
> Sent: vrijdag 5 maart 2004 9:58
> To: 'm0n0wall at lists dot m0n0 dot ch'
> Subject: RE: [m0n0wall] Access to webGUI using
> generic-pc-1.0.img -more
> in fo
> Tried the same image on a generic-pc with the same
> results...DHCP server
> released an IP address, DHCP client received an IP address. 
> Tried access
> webGUI with Internet Exploder it timed out, tried access 
> webGUI with Mozilla
> Firefox it timed out. 
> I have also tried pb27 on the Nokia, and a generic PC with the same 
> reults....
> Help...I really like the look of this product...it answers all my 
> problems...and I would really like to try it....
> Patrick
> -----Original Message-----
> From: Barber, Patrick (MCI)
> Sent: 04 March 2004 12:55
> To: 'm0n0wall at lists dot m0n0 dot ch'
> Subject: [m0n0wall] Access to webGUI using generic-pc-1.0.img
> Hi,
> I have installed the latest version onto a Harddisk,
> installed the Harddisk
> into a Nokia IP120 which boots fine. The DHCP client on the 
> WAN interface
> gets an IP address from a DHCP server OK...the DHCP server on 
> LAN Interface
> is releasing IP addresses to clients OK. However I cannot 
> connect to the
> webGUI with a client on the LAN interface.
> During Bootup messages I See the following message
> IP Filter: v3.4.31 initialized.  Default = block all, Logging
> = enabled
> If I scan the m0n0wall with NMAP I see no ports open? Which I
> think is abit
> strange as it is accepting and replying DHCP requests.
> If I run tcpdump on the client I see the syn packets leave
> the client going
> to m0n0wall on TCP port 80 but get no syn/ack packets.
> Can anyone please help?

This is really strange behaviour! I've never seen it with m0n0.

I would think that interfaces are not assigned, but why is DHCP working
then? Have you assigned them?


Oce enables its customers to manage their documents efficiently and
effectively by offering innovative print and document management products
and services for professional environments.

This e-mail message and any attachment are intended for the sole use of the
recipient(s) named above and may contain information which is confidential
and/or protected by intellectual property rights. Any use of the information
contained herein (including, but not limited to, total or partial
reproduction, communication or distribution in any form) by other persons
than the designated recipient(s) is prohibited.

If you have received this e-mail in error, please notify the sender either
by telephone (0032-2-729.48.11) or by e-mail and delete the material from
any computer. Oce-Belgium/Oce-Interservices is nor responsible for the
correct and complete transfer of the contents of the sent e-mail, neither
for the receipt on due time.  This e-mail message does not bring about a
contractual obligation for Oce-Belgium/Oce-Interservices.

Thank you for your cooperation.

For further information about Oce-Belgium/Oce-Interservices please see our
website at www.oce.be