[ previous ] [ next ] [ threads ]
 
 From:  "Frans J King" <kingf1 at cs dot man dot ac dot uk>
 To:  "'Greg Sims'" <greg underscore sims at earthlink dot net>
 Cc:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Two Lan Subnets / One with DHCP Server
 Date:  Wed, 27 Aug 2003 17:43:54 +0100
Greg,

I'm not quite sure then what kind of setup you are aiming for. How are
you going to route packets between one subnet and the other.

You could for example (with 3 NICs) have a WAN interface, a LAN
interface (for the DHCP enabled subnet) and a OPT interface that you use
for the statically assigned machines.

HTH,

Frans




-----Original Message-----
From: Greg Sims [mailto:greg underscore sims at earthlink dot net] 
Sent: 27 August 2003 17:13
To: Frans J King
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] Two Lan Subnets / One with DHCP Server

Thanks Frans but I really need two separate subnets.  Does this mean
that it
is not possible to do this with m0n0wall?

Thanks again, Greg

-----Original Message-----
From: Frans J King [mailto:kingf1 at cs dot man dot ac dot uk]
Sent: Wednesday, August 27, 2003 1:11 AM
To: 'Greg Sims'
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: RE: [m0n0wall] Two Lan Subnets / One with DHCP Server


I think the easiest thing would be to have an internal lan ip range of
10.43.0.0 to 10.43.1.255 and restrict the DHCP address pool to 10.43.1.0
to 10.43.1.255. Not sure if this is what you want though.

Regards,

Frans



-----Original Message-----
From: Greg Sims [mailto:greg underscore sims at earthlink dot net]
Sent: 27 August 2003 03:00
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] Two Lan Subnets / One with DHCP Server

Hi There,

I would like to create two subnets on the LAN Interface of m0n0wall.
Let's
call these 10.43.0.0/24 and 10.43.1.0/24.  The ip address of m0n0wall
will
be 10.43.0.1.  All the devices on the 10.43.0.0/24 subnet will have
static
IP assignments.

The 10.42.1.0/24 subnet will be used by clients that will be connected
for a
few hours at a time.  This subnet will require a DHCP Server as a
result.

Is this kind of a configuration possible?  Thanks in advance!

Greg



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch