Hi!

I have the same problems with my Netgear-MA311.
It hangs whith the same log entries when I run it on max load for a few 
minutes (FTP or filecopy).

Some say that you should be able to correct the problem with new prism 
firmware, but I wasn't able to use the latest ones on my card..
But you could give it a try, info @ http://linux.junsun.net/intersil-
prism/

/ Tomas

-----Original Message-----
From: "Anthony Rios" <aprios at netrox dot net>
To: <m0n0wall at lists dot m0n0 dot ch>
Date: Tue, 9 Mar 2004 21:56:21 -0500
Subject: [m0n0wall] DWL-520 V.E1 not supported

> Hey all,
> 	This might be old hat to most of you but I thought I would
> post it anyway.  I just bought a DWL-520 PCI card and wi fails
> to load it.
> Here's a copy of the log:
> 
> Mar 9 20:42:10 /kernel: device_probe_and_attach: wi0 attach returned 5
> Mar 9 20:42:10 /kernel: wi0: mac read failed 5
> Mar 9 20:42:10 /kernel: wi0: wi_cmd: busy bit won't clear.
> Mar 9 20:42:10 /kernel: wi0: wi_cmd: busy bit won't clear.
> Mar 9 20:42:10 /kernel: wi0: init failed
> Mar 9 20:42:10 /kernel: wi0: wi_cmd: busy bit won't clear.
> Mar 9 20:42:10 /kernel: wi0: wi_cmd: busy bit won't clear.
> Mar 9 20:42:10 /kernel: wi0: timeout in wi_cmd 0x0000; event status
> 0x0000
> Mar 9 20:42:10 /kernel: wi0: <Intersil Prism2.5> mem
> 0xe6800000-0xe6800fff
> irq 10 at device 18.0 on pci0
> 
> As far as I can tell its the wi driver.  Unfortunately, it looks like
> its
> time
> to move on from m0n0wall.  I have tried a DWL-520, a DWL 650, and a
> Compaq
> WL100.  All failed.
> The two DWL cards fail pretty much the same...
> 
> This is a great software package.  I just wish it would support more
> hardware.
> 
> :(
> 
> -Tony
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch