[ previous ] [ next ] [ threads ]
 
 From:  "Barber, Patrick (MCI)" <patrick dot barber dash eds at eds dot com>
 Cc:  "'m0n0wall at lists dot m0n0 dot ch'" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] RE: IP120 (was Disk-On-Chip?)
 Date:  Thu, 11 Mar 2004 09:24:14 -0000
OK I give up :-( 
I have just tried using a Flash card + IDE adapter with the ver1.0 generic
pc image on the flashcard in the IP120...same results...next step more
expense:-( the PC engines WRAP board..

Thanks for your help anyway..


Patrick 

-----Original Message-----
From: Barber, Patrick (MCI) [mailto:patrick dot barber dash eds at eds dot com] 
Sent: 10 March 2004 09:02
To: 'David Rodgers'
Cc: 'm0n0wall at lists dot m0n0 dot ch'
Subject: [m0n0wall] RE: IP120 (was Disk-On-Chip?)


Cheers for that...I have been using an IDE Hard drive...will try a flash
drive next to see if that makes any difference

-----Original Message-----
From: David Rodgers [mailto:david dot rodgers at kdsi dot net] 
Sent: 09 March 2004 19:07
To: Barber, Patrick (MCI)
Cc: 'm0n0wall at lists dot m0n0 dot ch'
Subject: Re: IP120 (was Disk-On-Chip?)


I just used a flash frive in place of the laptop hard disk that was in  
the
ip120 already. you could use any ide-flash device ....load it up with  
the
generic-pc image and then plug it into the ide interface on the ip120.

boot it up and plug a serial cable into the console port

it took almost 10 minutes from start to finish.
I took pictures of everything step by step if you're interested.


David Rodgers


On Mar 9, 2004, at 8:27 AM, Barber, Patrick (MCI) wrote:

> sorry David...meant to send this to the list
>
> -----Original Message-----
> From: Barber, Patrick (MCI)
> Sent: 09 March 2004 13:55
> To: 'David Rodgers'
> Subject: IP120 (was Disk-On-Chip?)
>
>
> Now I am getting frustrated other people mentioning running m0n0 on an
> IP120, what did you do to get it working? Please look at my email to
> list
> http://m0n0.ch/wall/list/? 
> action=show_msg&actionargs[]=39&actionargs[]=60
>
> Please help...
>
> -----Original Message-----
> From: David Rodgers [mailto:david dot rodgers at kdsi dot net]
> Sent: 08 March 2004 18:39
> To: Phill R Kenoyer
> Cc: m0n0wall at lists dot m0n0 dot ch
> Subject: Re: [m0n0wall] Disk-On-Chip?
>
>
> Ahh ... ok ... the diskonchip units that I have seen just look like a
> black plastic lump that plugs right into an ide channel.
>
> You may also want to hit ebay and look for a nokia ip120 before you
> invest in a soekris box.
>
> I won an ip120 for $56US
>
> they are functionally equivalent to a soekris 4801
>
> Pentium class 266 cpu
> 128mb memory
> 3 ethernet ports
>
> and they come with a 10 gig hard drive
>
> In mine I replaced the hard drive with one of these
>
> http://cgi.ebay.com/ws/eBayISAPI.dll?
> ViewItem&item=2791353055&category=51076
>
> The one I am using is only 64 megabytes though and I got it for $5US
>
> David Rodgers
>
>
>
>
> On Mar 8, 2004, at 10:02 AM, Phill R Kenoyer wrote:
>
>> But this diskonchip is soldered onto a mini-computer.  This thing
>> doesn't even have a serial port on it.  I guess I'll just have to 
>> replace it with a Soekris dual radio setup and scrap this Net Nimble 
>> system.  I don't see being able to do anything without having some 
>> other equipment to plug into it.
>>
>> On Mar 8, 2004, at 6:31 AM, David Rodgers wrote:
>>
>>> Yes ... it is functionally no different than setting it up with a cf
>>> card and an ide adapter. Just plug the diskonchip into a additional 
>>> ide interface then boot the machine and use dd to copy the image to 
>>> the /dev/hde(or whatever ide channel you chose)
>>>
>>> The diskonchip devices are pretty cool and really cheap on ebay
>>> these days. The first time I saw them was at a trade show. MicroTiK 
>>> was selling their router software flashed onto them. 
>>> http://www.microtik.com/
>>>
>>> David Rodgers
>>>
>>>
>>> On Mon, 2004-03-08 at 00:23, Phill R Kenoyer wrote:
>>>> Has anyone installed m0n0wall on a system that uses Disk-on-chip?
>>>>
>>>> I have two Net Nimble WRIP systems that I would love to replace the
>>>> software with m0n0wall.  Net Nimble's software is very limited and 
>>>> uses old drivers and such.  It's very proprietary.  The biggest 
>>>> problem I have, it comes with no documentation at all.  I just have 
>>>> to guess
>>>> at
>>>> what I'm doing.  If I could rewind, I would not have bought them.
>>>>
>>>> If anyone has any information on how to get m0n0wall onto a
>>>> Disk-on-chip type system, please email me.
>>>>
>>>> Thanks!
>>>>
>>>> System info:
>>>> 	Cyrix 486DX4
>>>> 	16MB RAM
>>>> 	16MB? HDD (15872 blocks)
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch