[ previous ] [ next ] [ threads ]
 
 From:  Phill R Kenoyer <phill at bmg50 dot com>
 To:  SDamron <sdamron at globalmtn dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Two m0n0wall connected via wireless.
 Date:  Fri, 12 Mar 2004 15:47:16 -0800
Why not Ad-Hoc?  It works with other systems.

Also, I've tried that too.
m0n0 OPT3 HOSTAP x.x.x.25/30 <--> m0n0 WAN BSS x.x.x.26/30 (Can't get 
association).

I just tested with my laptop and I can connect and ping both boxes 
using Ad-Hoc mode.

On Mar 12, 2004, at 3:38 PM, SDamron wrote:

> AP Mode and Client Mode......
>
> Scott
>
> Phill R Kenoyer wrote:
>> For the life of me, I can't seem to get two m0n0wall boxes to talk to 
>> each other in IBSS mode.  I have this working with other equipment 
>> just fine, just not two m0n0wall boxes.
>> Does anyone have any tips?
>> m0n0 OPT2 IBSS x.x.x.21/30 <--> NetNimble x.x.x.22/30  (Works Perfect)
>> m0n0 OPT3 IBSS x.x.x.25/30 <--> m0n0 WAN IBSS x.x.x.26/30  (wont work 
>> at all)
>> Maybe I'm missing something with the routing or NAT or something.  
>> I'm not sure.  I thought all I needed to do was assign it a IP and a 
>> gateway, set the SSID to the same as the other box and it should 
>> work?
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch