You know what, I have 2 types of outgoing traffic (I mean from my LAN to
the WAN), p2p and conventional traffic.

What I want is to put the outbound p2p on the opt1 connecte dto the
second adsl. Then there is the problem on how I use the incoming traffic
of the second adsl.

What is a DMZ interface??

Actually I am using the NAT of my adsl modem router (well it is called
in in the router NATP for port) instead of the m0n0 NAT. How can I
swicth off the modem-router and use the m0n0 NAT ???

Thanks in advance
Ciao
Gianluca

-----Mensaje original-----
De: Jim Gifford [mailto:jim at giffords dot net] 
Enviado el: domingo, 14 de marzo de 2004 20:44
Para: m0n0wall at lists dot m0n0 dot ch
Asunto: Re: Re: [m0n0wall] 2 adsl and 1 LAN ??

Almost any way you want...  You would make it an opt1 interface in
m0n0wall, and you could make it a DMZ interface, or an interface for
wireless traffic by hanging APs off of it, or you could make a separate
LAN with it.

m0n0wall is small, simple, powerful.  It doesn't support 2 WAN out of
the
box.  However, if you wanted to, you could perhaps do some funky routing
rules and advanced outbound nat work, and perhaps use the 3rd interface
as a wan interface that way.  However, that'll be a lot of work.

good luck,
jim

On Sun, Mar 14, 2004 at 08:31:15PM +0100, gr at redskycom dot net wrote:
> Ok, so how can I use the sis2 on my soeakris ???
> G
> 
> 
> -----Mensaje original-----
> De: Jim Gifford [mailto:jim at giffords dot net] 
> Enviado el: domingo, 14 de marzo de 2004 19:26
> Para: m0n0wall at lists dot m0n0 dot ch
> Asunto: FAQ: Re: [m0n0wall] 2 adsl and 1 LAN ??
> 
> m0n0wall doesn't currently support multiple WAN connections.  This has
> been asked many times on this list.
> 
> There has been discussion of how to add this, but so far as I'm aware,
> nothing has actually been tried or tested yet.
> 
> Can someone add this to the FAQ page (or teach me how to do so)?
> 
> jim
> 
> On Sun, Mar 14, 2004 at 12:25:10PM +0100, gr at redskycom dot net wrote:
> > 
> > I have the m0n0 wall on a soekris machine.
> > 
> > I would like to connect 1 LAN (already connected to sis0 on my m0n0
> > wall) to 2 seperate adsl (2 WAN). I have 1 dasl connected to the
sis1.
> > 
> > How is it possible to use the sis2 ?
> > 
> > Thanks Gianluca
> > 
> > 
> >
---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> > 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
> 
> 

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch