[ previous ] [ next ] [ threads ]
 
 From:  "T. Lechat" <m0n0wall at lechat dot org>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  [m0n0wall] Access WebGUI DSL Modem with WAN PPPOE set up ?
 Date:  Fri, 2 Apr 2004 14:39:14 +0200
Hi all...

I retry to ask for help (-;


My config is :
STATION[192.168.1.2]----------[192.168.1.1][LAN]m0n0wall[WAN][PPPOE]--------
-[100.0.0.2]DSLMODEM------>ISP

I need to connect from station to DSLMODEM webGUI.
WAN interface is configured as PPPOE. So m0n0wall doesn't set up an ip
adress on this side.

So with exec page, I make an ifconfig inet 100.0.0.1 netmask 255.255.255.0
tl0
Where rl0 is the physical ethernet WAN interface, opposed to ng0 which is
the pppoe which get the public WAN ip adress from my ISP.
Status page shows me that tl0 as a correct ip adress 10.0.0.1 set up.
Same page shows me that I have a correct route to 100.0.0.0/24 thru tl0

In theory, I have no need to uncheck "Block private Network" as I stole the
100.0.0.0 subnet which is a public network.... (-;

Ok, I can ping 100.0.0.1 from STATION
But I can't ping 100.0.0.2 from m0n0wall or from STATION

Log said : <132>Apr  2 01:24:39 ipmon[64]: 01:24:39.024326 tl0 @0:7 b
100.0.0.1 -> 100.0.0.2 PR icmp len 20 84 icmp echo/0 OUT
 where rule 7 group 0 is : @7 block out log quick from any to any


To test I add rule a dangerous rule with webGUI on WAN SIDE *:* to *:* any
pass
Same.... )-;


I will eat my hat (-;

Help !!!

- Thierry