[ previous ] [ next ] [ threads ]
 
 From:  "ham" <ham at skynet dot be>
 To:  "'Falcor'" <falcor at netassassin dot com>
 Cc:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE : [m0n0wall] soekris 4801 and m0n0wall
 Date:  Sun, 4 Apr 2004 00:57:19 +0200
How can I do that ?  Sorry, but for me Soekris it's new.

Thanks.

Ham

-----Message d'origine-----
De : Falcor [mailto:falcor at netassassin dot com] 


Cc : m0n0wall at lists dot m0n0 dot ch
Objet : Re: [m0n0wall] soekris 4801 and m0n0wall


looks like your 4801 is set to boot off of a hard drive and not the CF 
card. You need to change that.
"BIOS drive C: is disk0"


ham wrote:

>Hello,
> 
>I want install M0n0wall on soekris 4801 but its not fonctionning.
> 
>I have well created the image on my CF with the tool physdiskwrite.exe
> 
>When I boot the 4801 I receive the message : Fatal trap 12: page fault 
>while in kernel mode
> 
>Here under you can find my boot sequence.
> 
>Thanks to all for your help.
> 
>Ham
> 
> 
> 
>comBIOS ver. 1.24  20040312  Copyright (C) 2000-2004 Soekris 
>Engineering.
> 
>net4801
> 
>0128 Mbyte Memory                        CPU Geode 266 Mhz
> 
>Pri Mas  SanDisk SDCFB-64                LBA 490-8-32  62 Mbyte
> 
>PXE-M00: BootManage UNDI, PXE-2.0 (build 082)
> 
>Slot   Vend Dev  ClassRev Cmd  Stat CL LT HT  Base1    Base2   Int
>-------------------------------------------------------------------
>0:00:0 1078 0001 06000000 0107 0280 00 00 00 00000000 00000000 00 
>0:06:0 100B 0020 02000000 0107 0290 00 3F 00 0000E101 A0000000 10 
>0:07:0 100B 0020 02000000 0107 0290 00 3F 00 0000E201 A0001000 10 
>0:08:0 100B 0020 02000000 0107 0290 00 3F 00 0000E301 A0002000 10 
>0:18:2 100B 0502 01018001 0005 0280 00 00 00 00000000 00000000 00 
>0:19:0 0E11 A0F8 0C031008 0117 0280 08 38 00 A0003000 00000000 11
> 
> 1 Seconds to automatic boot.   Press Ctrl-P for entering Monitor.
>Console: internal video/keyboard
>BIOS drive C: is disk0
>BIOS 639kB/130048kB available memory
> 
>FreeBSD/i386 bootstrap loader, Revision 0.8 (root at nb dot neon1 dot net, Mon Jul

>28 20:31:49 CEST 2003) /kernel text=0x198840 data=0x23e44+0x1c7a0
>syms=[0x4+0x2a810+0x4+0x317f6]
>Hit [Enter] to boot immediately, or any other key for command prompt.
>Booting [kernel]...
>Copyright (c) 1992-2003 The FreeBSD Project.
>Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
>        The Regents of the University of California. All rights
>reserved.
>FreeBSD 4.9-RELEASE-p4 #0: Sat Mar 27 18:18:22 CET 2004
>    root at nb dot neon1 dot net:/usr/src/sys/compile/M0N0WALL_NET48XX
>Timecounter "i8254"  frequency 1193182 Hz
>CPU: NSC Geode (266.60-MHz 586-class CPU)
>  Origin = "Geode by NSC"  Id = 0x540  Stepping = 0  DIR=0x81b7
>  Features=0x808131<FPU,TSC,MSR,CX8,CMOV,MMX>
>real memory  = 134217728 (131072K bytes)
>avail memory = 116944896 (114204K bytes)
>Preloaded elf kernel "kernel" at 0xc0d37000.
>Preloaded mfs_root "/mfsroot" at 0xc0d3709c.
>md0: Preloaded image </mfsroot> 10485760 bytes at 0xc0335e34
>md1: Malloc disk
>npx0: <math processor> on motherboard
>npx0: INT 16 interface
>pcib0: <Host to PCI bridge> on motherboard
>pci0: <PCI bus> on pcib0
>sis0: <NatSemi DP83815 10/100BaseTX> port 0xe100-0xe1ff mem
>0xa0000000-0xa0000ff
>f irq 10 at device 6.0 on pci0
>sis0: Ethernet address: 00:00:24:c1:c8:dc
>miibus0: <MII bus> on sis0
>ukphy0: <Generic IEEE 802.3u media interface> on miibus0
>ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>sis1: <NatSemi DP83815 10/100BaseTX> port 0xe200-0xe2ff mem
>0xa0001000-0xa0001ff
>f irq 10 at device 7.0 on pci0
>sis1: Ethernet address: 00:00:24:c1:c8:dd
>miibus1: <MII bus> on sis1
>ukphy1: <Generic IEEE 802.3u media interface> on miibus1
>ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>sis2: <NatSemi DP83815 10/100BaseTX> port 0xe300-0xe3ff mem
>0xa0002000-0xa0002ff
>f irq 10 at device 8.0 on pci0
>sis2: Ethernet address: 00:00:24:c1:c8:de
>miibus2: <MII bus> on sis2
>ukphy2: <Generic IEEE 802.3u media interface> on miibus2
>ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
>isab0: <PCI to ISA bridge (vendor=100b device=0510)> port
>0x6200-0x623f,0x6100-0
>x613f at device 18.0 on pci0
>isa0: <ISA bus> on isab0
>chip1: <PCI to Other bridge (vendor=100b device=0511)> port
>0x6300-0x63ff at dev
>ice 18.1 on pci0
>atapci0: <Generic PCI ATA controller> port 0xe000-0xe00f at device 18.2
>on pci0
>ata0: at 0x1f0 irq 14 on atapci0
>ata1: at 0x170 irq 15 on atapci0
>chip2: <PCI to Other bridge (vendor=100b device=0515)> port
>0x6500-0x653f at dev
>ice 18.5 on pci0
>ohci0: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 11
>at devic
>e 19.0 on pci0
>usb0: OHCI version 1.0, legacy support
>usb0: <OHCI (generic) USB controller> on ohci0
>usb0: USB revision 1.0
>uhub0: (0x0e11) OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
>uhub0: 3 ports with 3 removable, self powered
>orm0: <Option ROM> at iomem 0xc8000-0xd1fff on isa0
>pmtimer0 on isa0
>sio0 at port 0x3f8-0x3ff irq 4 flags 0x30 on isa0
>sio0: type 16550A, console
>sio1 at port 0x2f8-0x2ff irq 3 on isa0
>sio1: type 16550A
>BRIDGE 020214 loaded
>IPsec: Initialized Security Association Processing.
>IP Filter: v3.4.33 initialized.  Default = block all, Logging = enabled
>ad0: READ command timeout tag=0 serv=0 - resetting
>ata0: resetting devices .. done
>ad0: 61MB <SanDisk SDCFB-64> [490/8/32] at ata0-master WDMA2
>ad0: READ command timeout tag=0 serv=0 - resetting
>ata0: resetting devices .. done
>ad0: READ command timeout tag=0 serv=0 - resetting
>ata0: resetting devices .. done
>ad0: READ command timeout tag=0 serv=0 - resetting
>ad0: trying fallback to PIO mode
>ata0: resetting devices .. done
> 
>
>Fatal trap 12: page fault while in kernel mode
>fault virtual address   = 0x780090
>fault code              = supervisor read, page not present
>instruction pointer     = 0x8:0xc0189287
>stack pointer           = 0x10:0xc029b770
>frame pointer           = 0x10:0xc029b7a8
>code segment            = base 0x0, limit 0xfffff, type 0x1b
>                        = DPL 0, pres 1, def32 1, gran 1
>processor eflags        = interrupt enabled, resume, IOPL = 0
>current process         = Idle
>interrupt mask          = bio
>trap number             = 12
>panic: page fault
> 
>syncing disks...
>done
>Uptime: 41s
>Automatic reboot in 15 seconds - press a key on the console to abort
>--> Press a key on the console to reboot,
>--> or switch off the system now.
>
>
>  
>