[ previous ] [ next ] [ threads ]
 
 From:  Christiaens Joachim <jchristi at oce dot be>
 To:  "'michael at winterland dot dhs dot org'" <michael at winterland dot dhs dot org>, m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: [m0n0wall] DMZ setup on net4501?
 Date:  Thu, 11 Sep 2003 16:04:07 +0200
In the console menu (over serial cable) you can select some item called
'assign network ports' or something like that... That should do the trick!

Joachim

-----Original Message-----
From: Michael [mailto:michael at winterland dot dhs dot org]
Sent: donderdag 11 september 2003 15:47
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] DMZ setup on net4501?


I just got my net4501 yesterday and I'm running m0n0wall on it now, it was
very quick to get setup and working fine.

one thing I am having a hard time figuring out is setting up a DMZ.  the
net4501 came with 3 ethernet ports, Net 0 and Net 1 are being used by
m0n0wall as the lan and wan ports and its working fine but nowhere in the
m0n0wall web config can I setup a DMZ and it doesnt mention sis2 (Net 2). 

in the screenshots on the homepage for m0n0, there it shows a DMZ interface
along with the wan and lan?

I downloaded and manually edited the config.xml, and added this:

<dmz>
	<if>sis2</if>
        <ipaddr>172.16.0.1</ipaddr>
	<subnet>12</subnet>			
</dmz>


under <interfaces> .    this seemed to bring up the 3rd ethernet interface
with that ip address, because if I went to the "ping" section of the
m0n0wall page I could ping that 172.16.0.1 address.  however I still had no
options anywere to configure a DMZ on this interface.

what am I missing ?  I also tried older release 14 and it had the same thing
			

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch


-----------------------------------------------
MISSION STATEMENT 
-----------------------------------------------
Oce enables its customers to manage their documents efficiently and
effectively by offering innovative print and document management products
and services for professional environments.

-----------------------------------------------
DISCLAIMER 
-----------------------------------------------
This e-mail message and any attachment are intended for the sole use of the
recipient(s) named above and may contain information which is confidential
and/or protected by intellectual property rights.
Any use of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any form) by
other persons than the designated recipient(s) is prohibited.

If you have received this e-mail in error, please notify the sender either
by telephone (0032-2-729.48.11) or by e-mail and delete the material from
any computer.
Oce-Belgium/Oce-Interservices is nor responsible for the correct and
complete transfer of the contents of the sent e-mail, neither for the
receipt on due time.  This e-mail message does not bring about a contractual
obligation for Oce-Belgium/Oce-Interservices.

Thank you for your cooperation.

For further information about Oce-Belgium/Oce-Interservices please see our
website at www.oce.be

-----------------------------------------------