Anyone used the built-in PPTP VPN client on OS X to successfully connect to
m0n0wall v1.0?
I've got it set up to the point where it begins negotiating, pauses for a
while, and then reports that the PPTP server closed the connection. The
only suspicious logged line on the m0n0wall side is:
mpd: [pptpc0] error writing len 42 frame to bypass: Can't assign requested address
which seems odd, as the LAN interface for the firewall is:
<if>sis0</if>
<ipaddr>192.168.1.50</ipaddr>
<subnet>24</subnet>
and the pptpd config looks pretty much smack in the heart of
192.168.1.0/24:
<pptpd>
<mode>server</mode>
<redir/>
<localip>192.168.1.51</localip>
<remoteip>192.168.1.208</remoteip>
<user>
<name>YYYYY</name>
<password>xxxxx</password>
</user>
<radius>
<server/>
<secret/>
</radius>
</pptpd>
Anyone had any success with this? I'm not quite sure where to start poking.
tx,
Adam
p.s. mildly obfuscated logs below.
mpd: [pptpc0] error writing len 42 frame to bypass: Can't assign requested address
mpd: pptp0-0: ignoring SetLinkInfo
mpd: [pptpc0] LCP: SendConfigReq #22
mpd: ACFCOMP
mpd: PROTOCOMP
mpd: MRU 1500
mpd: MAGICNUM 34cde244
mpd: AUTHPROTO CHAP MSOFTv2
mpd: MP MRRU 1600
mpd: MP SHORTSEQ
mpd: ENDPOINTDISC [802.1] 00 00 24 c1 ce 3c
mpd: [pptpc0] error writing len 42 frame to bypass: Can't assign requested address
mpd: [pptpc0] LCP: SendConfigReq #23
[...]
mpd: [pptpc0] LCP: state change Req-Sent --> Stopped
mpd: [pptpc0] LCP: LayerFinish
mpd: [pptpc0] LCP: parameter negotiation failed
mpd: [pptpc0] LCP: LayerFinish
mpd: [pptpc0] device: CLOSE event in state UP
mpd: pptp0-0: clearing call
mpd: pptp0-0: killing channel
mpd: [pptpc0] PPTP call terminated
mpd: [pptpc0] IFACE: Close event
mpd: [pptpc0] IPCP: Close event
mpd: [pptpc0] IPCP: state change Starting --> Initial
mpd: [pptpc0] IPCP: LayerFinish
mpd: [pptpc0] IFACE: Close event
mpd: pptp0: closing connection with 71.292.78.11:5140
mpd: [pptpc0] IFACE: Close event
mpd: [pptpc0] device is now in state CLOSING
mpd: [pptpc0] bundle: CLOSE event in state OPENED
mpd: [pptpc0] closing link "pptpc0"...
mpd: [pptpc0] device: CLOSE event in state CLOSING
mpd: [pptpc0] device is now in state CLOSING
mpd: [pptpc0] link: CLOSE event
mpd: [pptpc0] LCP: Close event
mpd: [pptpc0] LCP: state change Stopped --> Closed
mpd: [pptpc0] device: DOWN event in state CLOSING
mpd: [pptpc0] device is now in state DOWN
mpd: [pptpc0] link: DOWN event
mpd: [pptpc0] LCP: Down event
mpd: [pptpc0] LCP: state change Closed --> Initial
mpd: [pptpc0] LCP: phase shift ESTABLISH --> DEAD
mpd: [pptpc0] device: DOWN event in state DOWN
mpd: [pptpc0] device is now in state DOWN
mpd: [pptpc0] link: DOWN event
mpd: [pptpc0] LCP: Down event
mpd: pptp0: ctrl connection closed by peer
mpd: pptp0: killing connection with 71.292.78.11:5140
--
Well, you win some, you lose some, and then <adam at baz dot org>
there's that little-known third category. - Al Gore <adam hirsch> |