[ previous ] [ next ] [ threads ]
 
 From:  Christiaens Joachim <jchristi at oce dot be>
 To:  "'Werner Gillmer'" <werner dot gillmer at enerweb dot co dot za>, Holger Bauer <Holger dot Bauer at citec dash ag dot de>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: AW: [m0n0wall] Dead m0m0wall...
 Date:  Wed, 21 Apr 2004 16:16:20 +0200
You 'll need 2 interfaces to setup/run m0n0, no way round that, sorry.

Joachim

> -----Original Message-----
> From: Werner Gillmer [mailto:werner dot gillmer at enerweb dot co dot za]
> Sent: woensdag 21 april 2004 17:21
> To: Holger Bauer
> Cc: m0n0wall at lists dot m0n0 dot ch
> Subject: Re: AW: [m0n0wall] Dead m0m0wall...
> 
> 
> Ok it turns out that m0n0 is not saving the network card assignment.
> I set LAN to rl0 and WAN to rl0 enter and reboot, m0n0 setup screen
> tells me LAN is sis0 WAN is sis1
> 
> Only have one network card in the box at the moment, just testin m0n0
> now, it complains that I cannot assign rl0 to LAN and WAN, 
> how can I get
> past this? I tried assigning lo0 to WAN, but it seems there is no
> loopback device.
> 
> On Wed, 2004-04-21 at 16:10, Werner Gillmer wrote:
> > HEhehe...M0n0wall ;)
> > 
> > It's got two interfaces, sits on the same network as my PC. 
> M0n0 reports
> > the NIC (rl0) to be up with the IP I gave it 
> (192.168.100.212) my PC is
> > (192.168.100.220), I cannot ping M0n0 or access the web 
> interface.... 
> > 
> > On Wed, 2004-04-21 at 14:51, Holger Bauer wrote:
> > > Obviously something went wrong with your download, if you have a
> > > m0-M-0wall and not a m0n0wall.... ;-)
> > > 
> > > Ok, Could it be thar your LAN is connnected to the 
> WAN-Port of your 
> > > m0n0wall? And has your machine only one interface?
> > > Is your m0n0wall connected to a switch or to a single 
> computer? If you
> > > have connected it to a single computer did you use a 
> crossovercable?
> > > 
> > > regards,
> > > Holger Bauer
> > > 
> > > 
> > > 
> > > 

> > > Von: Werner Gillmer [mailto:werner dot gillmer at enerweb dot co dot za]
> > > Gesendet: Mittwoch, 21. April 2004 15:19
> > > An: m0n0wall at lists dot m0n0 dot ch
> > > Betreff: [m0n0wall] Dead m0m0wall...
> > > 
> > > 
> > > 
> > > Looking over the website, this looks like a great 
> package, but I cannot
> > > see my m0m0wall at all. I am using the CD/floppy version, 
> on a box with
> > > a realtek card in, m0m0 says the link is up, I assigned 
> it a new IP
> > > address, but I cannot ping the m0m0wall box at all, 
> cannot see the web
> > > interface....nothing. Anyone got any ideas what's wrong?
> -- 
> 
> Werner Gilmer
> Designation:
> E-mail: werner dot gilmer at enerweb dot co dot za 
> Tel: +27 11 800 4626
> Fax: +27 11 800 5970
> www.enerweb.co.za
> 
> Inspired Technology for the New Energy Market
> 
> 
> 
> 
> The perusal, use, dissemination, copying or storing of this message or
> its attachments and the opening of attachments is subject to Enerweb's
> standard
> email disclaimer available at internet address:
> www.enerweb.co.za/email_disclaimer.htm or on request from the sender.
> 
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 


-----------------------------------------------
MISSION STATEMENT 
-----------------------------------------------

effectively by offering innovative print and document management products
and services for professional environments.

-----------------------------------------------
DISCLAIMER 
-----------------------------------------------
This e-mail message and any attachment are intended for the sole use of the
recipient(s) named above and may contain information which is confidential
and/or protected by intellectual property rights.
Any use of the information contained herein (including, but not limited to,
total or partial reproduction, communication or distribution in any form) by
other persons than the designated recipient(s) is prohibited.

If you have received this e-mail in error, please notify the sender either
by telephone (0032-2-729.48.11) or by e-mail and delete the material from
any computer.
Oce-Belgium/Oce-Interservices is nor responsible for the correct and
complete transfer of the contents of the sent e-mail, neither for the
receipt on due time.  This e-mail message does not bring about a contractual
obligation for Oce-Belgium/Oce-Interservices.

Thank you for your cooperation.

For further information about Oce-Belgium/Oce-Interservices please see our
website at www.oce.be

-----------------------------------------------