On Wed, 2004-05-05 at 16:47, Alexander Goldstone wrote:
> > > Is it possible to assign multiple IPs to the WAN interface?
> >
> > if your IPs are one network, so just put the network into the
> > static-wan-section - is working fine here
> 
> We wouldn't want it to listen on all IPs on a subnet (I think this is what you
> mean - appologies if I am wrong).
> 
> We are assigned 12 IPs from our ISP and need to make use of several of these for
> different purposes.

this 12 IPs can be one network 
example
210.130.10.12/28
Address:   210.130.10.12         11010010.10000010.00001010.0000 1100
Netmask:   255.255.255.240 = 28  11111111.11111111.11111111.1111 0000
Wildcard:  0.0.0.15              00000000.00000000.00000000.0000 1111
=>
Network:   210.130.10.0/28       11010010.10000010.00001010.0000 0000
(Class C)
Broadcast: 210.130.10.15         11010010.10000010.00001010.0000 1111
HostMin:   210.130.10.1          11010010.10000010.00001010.0000 0001
HostMax:   210.130.10.14         11010010.10000010.00001010.0000 1110
Hosts/Net: 14

or it could be 12 IP's link
210.130.10.17-19
210.130.10.35-39 ...


> For example, if we want 2 webservers behind the firewall we would need to
> forward port 80 on one IP independently of port 80 on another IP.
> 
> Another example might be using an IP for a permanent VPN connection and another
> for our roaming VPN clients.
> 
> The second example might be fine over one IP but the first example wouldn't.
> 
> Thanks for any help.
> 
> Alex.
-- 
fisch <fisch at conne dash island dot de>