Hi Alex

Yes - i've got the following rule:

PPTP Clients: Source * --> Destination * --> Port * ... so, should be all
open to connect !

The funny thing is, that i was able to ping a device from the DHCP-Range
(10.0.0.150 - 10.0.0.199) - BUT not able to ping devices with static-ip's
like 10.0.0.13. These Devices are configures as:

IP 10.0.0.13
SN: 255.255.255.0
GW: 10.0.0.1

... hmmm ... any other ideas ?

Thanx,
Marc 

-----Ursprüngliche Nachricht-----
Von: Alexander C.H. Lorenz [mailto:al at dsncon dot de] 
Gesendet: Freitag, 21. Mai 2004 10:58
An: Marc Berbet
Cc: m0n0wall at lists dot m0n0 dot ch
Betreff: Re: AW: [m0n0wall] PPTP-Connection / not able to connect to other&
network& devices [ok!] [ok!]

Hi Marc,

When the pptp server is "on",  you can connect the firewall via pptp,
these connection will be handled by the pptp server.
You have to add a rule for the pptp-interface, maybe pass incoming
connections from interface pptp sourceport any to LAN port any.

Did u have a rule like this?

regards
alex


Marc Berbet schrieb:
> Hi again !
> 
> I already had add a firewall rule - otherwise i where not able to connect
> over pptp to the firewall ... or where i ???
> Or how does this rule look in your eyes ?
> 
> thanx,
> marc
> 


-- 

Alexander C.H. Lorenz, Senior Consultant
DSNCON GmbH             Tel.: +49.89.90 11 97 51
Haunmuehle 22           Fax.: +49.89.90 11 97 33
84032 Pfettrach         Mobil:+49.173.85 88 85 3
http://www.dsncon.de    al at dsncon dot de
datacenter - security - network - consulting

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch

"scanned by AVG Antivirus System 7.0.245"