[ previous ] [ next ] [ threads ]
 
 From:  Fred Wright <fw at well dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: [m0n0wall] PPPoE problem with SBC DSL in CT
 Date:  Thu, 27 May 2004 19:45:36 -0700 (PDT)
On Thu, 27 May 2004, taharka wrote:
> Hello,
> >
> > I am now setting up another m0n0 in a new environment that is PPPoE over
> > DSL.  The hardware is a Intel P300 / 128MB RAM / 32x CD / 3 x
> > 3c959-B NICS.
> > I am running a CD ISO of m0n0 1.0 stable.
> >
> > The hardware boots and recognizes all the NICs.  After I assign
> > them, I can
> > use each interface correctly (ping & connect) but cannot get the PPPoE
> > handshake with the ISP.
> >
> > I have tested the PPPoE with a simple laptop straight into the DSL modem
> > with good success.

Does the ISP need you to specify a "service name"?

> What DSL/model modem are you using? Also, could you post the output of the
> m0n0wall system log? There should be enough info in the log for
> troubleshooting.

If not, can you connect another machine (e.g. the laptop) into the same
link via a hub (not a switch) and use something like tcpdump or ethereal
to trace the attempt?

					Fred Wright