[ previous ] [ next ] [ threads ]
 
 From:  Thomas Hertz <thomas at hz dot se>
 To:  Frans J King <kingf1 at cs dot man dot ac dot uk>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] M0n0wall PC Image fails to work
 Date:  Thu, 25 Sep 2003 17:43:02 +0200
Personally, I have a tiny version of each of the *BSD:s running as 
virtual machines in VMWare. Great piece of software.

--
Thomas Hertz

Frans J King wrote:

>I had problems getting the m0n0wall images to mount on a standard redhat
>9 box. In the end I built a freebsd machine to do it for me. 
>
>-----Original Message-----
>From: Thomas Hertz [mailto:thomas at hz dot se] 
>Sent: 25 September 2003 16:34
>To: m0n0wall at lists dot m0n0 dot ch
>Subject: Re: [m0n0wall] M0n0wall PC Image fails to work
>
>Hi again,
>Yes, the filesystem is UFS (sometimes referred to as FFS). Try both, if 
>you have support for them in your kernel it should work.
>
>--
>Thomas Hertz
>
>
>Chris Bond wrote:
>
>  
>
>>Just tried mount -o loop -t minix /home/chris/generic-pc-pb15r497.img
>>/mnt/flash and it didn't work any idea what the filesystem type is?
>>
>>-----Original Message-----
>>From: Thomas Hertz [mailto:thomas at hz dot se] 
>>Sent: 25 September 2003 4:16 PM
>>To: m0n0wall at lists dot m0n0 dot ch
>>Subject: Re: [m0n0wall] M0n0wall PC Image fails to work
>>
>>Just mount the image loopback, and edit /etc/fstab and change all 
>>occurances of "ad0a" to "ad2a".
>>In *BSD you use the "vnconfig" command, and in linux "mount -o 
>>generic-pc-pb15r497.img /mnt".
>>
>>--
>>Thomas Hertz
>>
>>
>>Chris Bond wrote:
>>
>> 
>>
>>    
>>
>>>Just installed the PC Image on a compactflash.  It boots you get the
>>>      
>>>
>kernel
>  
>
>>>loading etc but you get the following messages on boot and
>>>      
>>>
>consequently you
>  
>
>>>can not run assign ip or any of the first 2-3 options on the console
>>>      
>>>
>screen
>  
>
>>>nor is 192.168.1.1 pingable.
>>>
>>>Mount root from uds /dev/md0c
>>>Mount /dev/ad0a: Device not configured
>>>
>>>Warning: fopen(conf/config.xml): failed to open stream: No such file
>>>      
>>>
>or
>  
>
>>>directory in /etc/inc/xmlparse.inc on line 123
>>>
>>>Is there anyway to fix this?  Its running on the linux eqvil of
>>>      
>>>
>/dev/hdc -
>  
>
>>>cant change this as it's a lex light board.
>>>
>>>Kind Regards,
>>>Chris Bond
>>>
>>>
>>>---------------------------------------------------------------------
>>>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>>>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>>
>>>
>>>
>>>   
>>>
>>>      
>>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>
>>
>> 
>>
>>    
>>
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>  
>