[ previous ] [ next ] [ threads ]
 
 From:  "Chris Bond" <chris at logics dot co dot uk>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] M0n0wall PC Image fails to work
 Date:  Fri, 26 Sep 2003 09:57:27 +0100
Ok got freebsd5 installed and grabbed the image onto the box - whats the
cmds to mount the image so I can modify the fstab.  It seems its mdconfig
now not vnconfig.

Sorry to be a pain =)

-----Original Message-----
From: Thomas Hertz [mailto:thomas at hz dot se] 
Sent: 25 September 2003 4:16 PM
To: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] M0n0wall PC Image fails to work

Just mount the image loopback, and edit /etc/fstab and change all 
occurances of "ad0a" to "ad2a".
In *BSD you use the "vnconfig" command, and in linux "mount -o 
generic-pc-pb15r497.img /mnt".

--
Thomas Hertz


Chris Bond wrote:

>Just installed the PC Image on a compactflash.  It boots you get the kernel
>loading etc but you get the following messages on boot and consequently you
>can not run assign ip or any of the first 2-3 options on the console screen
>nor is 192.168.1.1 pingable.
>
>Mount root from uds /dev/md0c
>Mount /dev/ad0a: Device not configured
>
>Warning: fopen(conf/config.xml): failed to open stream: No such file or
>directory in /etc/inc/xmlparse.inc on line 123
>
>Is there anyway to fix this?  Its running on the linux eqvil of /dev/hdc -
>cant change this as it's a lex light board.
>
>Kind Regards,
>Chris Bond
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>  
>



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch