I went back further in the archives and found people have had random reboot
problems with the RealTek 8139 chipset.  I look this morning and the thing
rebooted 2 times since 1pm yesterday.  No big deal though.

-Rob

----- Original Message ----- 
From: "Holger Bauer" <Holger dot Bauer at citec dash ag dot de>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Wednesday, June 16, 2004 2:38 AM
Subject: AW: [m0n0wall] Anyone have luck with a RealTek 8139 10/100BaseTX


Just manually assign them and use DHCP on the LAN interface. After rebooting
try to obtain an IP-Adress via DHCP on the first NIC. If it doesn´t get one
try the next. If you get one you´ve found the LAN-Interface. Then logon to
the webadministration and go to "status - interfaces". You see all your
Interfaces. Now take another Client and connect them to one of your free
ports. Reload the interfaces-page and check which status has changed. After
doing this for all ports you should know which card is rl0, rl1, ...
If you now wish to change the order of the Interfaces go to
"Interfaces-assign".

I hope this helps. Of course knowing the MAC-Adresses of your cards would
make it much easier, but I also had Nics which hadn´t printed them on
anywhere.

regards,
Holger Bauer

-----Ursprüngliche Nachricht-----
Von: Robert Staph [mailto:rstaph at digitalimpreza dot com]
Gesendet: Dienstag, 15. Juni 2004 20:45
An: m0n0wall at lists dot m0n0 dot ch
Betreff: [m0n0wall] Anyone have luck with a RealTek 8139 10/100BaseTX


Just what the subject says.  I'm having a horrible time getting a junk box
together for a friend with the only 10/100 cards I have left (RealTek 8139
10/100BaseTX).  I can't get it to "auto-detect on link-up" when trying to
assign interfaces.  I know from digging, that the realtek cards (4 in
system) will probably be named rl0-3.  But I don't know it things will work
even if I manuall assign them if they don't work with the auto assign
feature.

Any input would be lovely,
Rob


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch


____________
Virus checked by G DATA AntiVirusKit


---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch