[ previous ] [ next ] [ threads ]
 
 From:  Chet Harvey <chet at pittech dot com>
 To:  Daniel Loomis <dloomis at cox dash internet dot com>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Wireless Problems
 Date:  Tue, 22 Jun 2004 00:45:54 -0400
which version of m0n0wall? I am running a soekris 4521 w/ just 1 senao in 
hostap on m0n0wall version 1.0 and it works just dandy. But I know Seth was 
having issues also.

Maybe it's an issue in some versions???? What are you guys running?



Quoting Daniel Loomis <dloomis at cox dash internet dot com>:

> I continue to have problems getting wireless to work on my Soekris
> net4521 with two Teletronics/Senao pcmcia cards.  I get signal and essid
> for both channels in Netstumbler, but I cannot get a connection with my
> WinXP laptop.  DHCP is enabled on both and I have turned off 802.1x
> authentication on my laptop to simplify things.  WEP is turned on with
> key 1 using the hex format 0xffffffffff.  I have also tried it with WEP
> disabled.  I even tried manually entering the ip on the laptop to see if
> it was dhcp problem.  No fix!
> 
> Here is the wireless output of exec.php using the command ifconfig:
> 
> wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> 	inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255
> 	ether 00:02:6f:05:58:fe
> 	media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (DS/2Mbps
> <hostap>)
> 	status: associated
> 	ssid fpcwireless 1:fpcwireless
> 	stationname net4521
> 	channel 1 authmode OPEN powersavemode OFF powersavesleep 100
> 	wepmode MIXED weptxkey 1
> 	wepkey 1:64-bit
> wi1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> 	inet 192.168.3.1 netmask 0xffffff00 broadcast 192.168.3.255
> 	ether 00:02:6f:05:59:2f
> 	media: IEEE 802.11 Wireless Ethernet autoselect <hostap> (DS/2Mbps
> <hostap>)
> 	status: associated
> 	ssid fpcwireless2 1:fpcwireless2
> 	stationname net4521
> 	channel 11 authmode OPEN powersavemode OFF powersavesleep 100
> 	wepmode MIXED weptxkey 1
> 	wepkey 1:64-bit
> 
> What is frustrating is the the very same hardware and settings work fine 
> running Pebble Linux.  Connections are strong and fast under Linux.  I
> cannot
> believe FreeBSD/M0n0wall would be all that much different.
> 
> Dan Loomis
> 
> 
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> 
> 


-- 
Chet Harvey
Pitbull Technologies <http://www.pittech.com/> 
Protecting your Digital Assets
703.407.7311