[ previous ] [ next ] [ threads ]
 From:  "Daniele Guazzoni" <daniele dot guazzoni at gcomm dot ch>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Problem booting CF
 Date:  Wed, 30 Jun 2004 02:52:00 +0200

The Cobalt RAQ seems to boot the rom (linux) kernel instead of access the
I guess I would need to modify the boot rom to get m0n0 working but I'm
rather to get another hardware...

-----Original Message-----
From: Joey Morin [mailto:jmorin at icomm dot ca] 
Sent: Mittwoch, 30. Juni 2004 02:18
To: Daniele Guazzoni
Subject: Re: [m0n0wall] Problem booting CF

This one time, at band camp, Daniele Guazzoni said:

> I'm trying to recycle a Sun Cobalt RAQ4 to run m0n0wall. I'm using a 
> CF-to-IDE adapter connected as hda. I wrote the generic-pc-1.0 (also 
> tried 1.1b15) with physdiskwrite to a SanDisk 64M.
> m0n0 boots the kernel but cannot mount the root.
> Something is wrong as the boot tell me: hda: drive_cmd: status=0x51 { 
> DriveReady SeekComplete Error } hda: drive_cmd: error=0x04 { 
> DriveStatusError }
> See the complete boot sequence at http://www.gcomm.ch/m0n0boot.txt
> On a "normal" PC it boots fine. Any idea out there ?

forgive me for being dense, but why when i search your log posted at the
link above do i not find anything to suggest it is a console log from a
m0n0wall boot?  i find "linux" all over the place, but not "Free" or "BSD"