Thank you for the instructions on how to do this.  I was just wondering...
are there any plans to add this as an additional section to the GUI.  If so
that would be great!

Just wondering?

Joe
----- Original Message ----- 
From: "Vincent FLEURANCEAU" <vincent at bikost dot com>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Wednesday, June 30, 2004 6:49 AM
Subject: Re: [m0n0wall] M0n0wall and public IPs


>
> -------- Message original --------
>
> >
> > Does anyone know how many public IP addresses on the WAN m0n0wall can
use @
> > once?
> >
>
> I guess your ISP give an IP block, so the limit would be the number of
> available IP addresses in that block.
>
> To get it up and running, you need to set up IP aliases.
>
> Step 1 - configure the 'main' IP address via the WAN WebGUI pannel.
>
> Step 2 - Configure other IP addresses (aliases) for the WAN interface:
>
> Go to http://m0n0-ip/exec.php and execute:
>
> /sbin/ifconfig sis0 x.x.x.A netmask 255.255.255.255 alias
> /sbin/ifconfig sis0 x.x.x.B netmask 255.255.255.255 alias
>
> and so on...
>
>
> Notice: the changes won't be active after a reboot. If you need to makes
> these settings persistent:
>
> 1 - Download your the config.xml file
>
> 2 - Place custom commands between the <shellcmd> and </shellcmd> tags in
> the <system> section
>
> Example :
>
> <shellcmd>/sbin/ifconfig sis0 x.x.x.A netmask 255.255.255.255
> alias</shellcmd>
> <shellcmd>/sbin/ifconfig sis0 x.x.x.B netmask 255.255.255.255
> alias</shellcmd>
>
> and so on...
>
> 3 - Upload the file back to your m0n0wall box.
> 4 - reboot and enjoy!
>
>
> I hope this is what you needed ;-)
>
> -- Vincent
>
>
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>