Here is what I use:

Firewall: Rules::WAN interface
 TCP/UDP  *  *  192.168.5.102  3389  RDC

Firewall: NAT::Inbound
TCP/UDP  3389  192.168.5.102  3389  RDC

Try dropping the source port (change to *) and see if that makes a
difference.


-----Original Message-----
From: Ryan Giobbi [mailto:rgiobbi at zoominternet dot net]
Sent: Wednesday, June 30, 2004 7:10 PM
To: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] remote desktop connection


I'm trying to make a remote desktop connection from the internet to a
machine with a 192 address on my LAN.

I have created a WAN Rule:  TCP/UDP 	* 	3389 	192.168.0.10 	3389

A LAN rule:  TCP/UDP 	* 	3389 	192.168.0.10 	3389 	NAT remote
desktop
and a NAT rule:  WAN 	TCP 	3389 	192.168.0.10 	3389

but this setup will not work. Any ideas?

Thanks