I can browse to 192.168.0.4 and I have to NICs in my computer. One is Lan
and the other is Wan.
I configed my Wan as 22.214.171.124, but it says 'Request time out' when I
tried to ping 126.96.36.199
What should I do then?
----- Original Message -----
From: "Seth Rothenberg" <seth at pachai dot net>
To: "Soft Routers" <softrouters at 163 dot com>
Cc: <m0n0wall at lists dot m0n0 dot ch>
Sent: Monday, July 05, 2004 10:44 AM
Subject: Re: [m0n0wall] How to setup in WEBGUI
> > I have installed the m0n0wall in vmware and I have configed the Lan ip
> > address as 192.168.0.4
> You have given us a little information, but
> you may need to give us more.
> 1) what problem are you having?
> FYI, you should be able to browse to the above
> address from the port that you designated as LAN port
> when you did the setup via serial console.
> 2) Do you have 2 NIC's or ethernet ports in your machine?
> Did you designate one port as WAN?
> Once you browse to the m0n0wall, it is quite easy
> to set up.
> I didn't ask what hardware platform you are on,
> because m0n0wall should not care, but it may
> come in useful if you have hardware-specific questions.