[ previous ] [ next ] [ threads ]
 
 From:  <Alex underscore Randjelovic at Dell dot com>
 To:  <vincent at bikost dot com>, <m0n0wall at lists dot m0n0 dot ch>
 Cc:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] PPPoE and static IP
 Date:  Wed, 7 Jul 2004 09:53:52 -0500
I have block of static IP addresses. If I don't specify IP on WAN
interface, I'll be assigned one. But is there a way to specify IP on WAN
interface, like you would in PIX:
ip address outside xxx.xxx.xxx.xxx 255.255.255.255 pppoe

-----Original Message-----
From: Vincent FLEURANCEAU [mailto:vincent at bikost dot com] 
Sent: Wednesday, July 07, 2004 10:10 AM
To: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] PPPoE and static IP



-------- Original Message --------


> Is there a way to assign static IP address on WAN interface type
PPPoE?
> I have SBC DSL that is using PPPoE and block of static IP addresses.
> 
> Thank you
> 
> Alex
> 
> 

If I've well understood the past threads, you'll get one static IP for 
the WAN interface during the PPP session and you'll have to manually set

up IP aliases for that interface for the remaining IP addresses...

If it's true, you're lucky. If I'm wrong, could someone let me know ;-)

-- Vincent



---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch