Hey Folks,

I`ve searched the archives and did not find a hint to
get my Lucent Orinoco Goldcard ( TI PCMCIA -> PCI Bridge )
working.

I set up another FreeBSD system to test whether the combination
would work on a *free* system and that it did.

So I set up all the fancy development stuff including pxe boot etc.

But what I did ( changing pccard.conf etc. ) didn`t help.

Any Ideas ?

Thanks a lot in advance,

Kamil


Here is a copy of the syslog :

Oct 8 01:45:45 /kernel: pccard: card inserted, slot 0
Oct 8 01:45:45 /kernel: pccard: card removed, slot 0
Oct 8 01:45:45 /kernel: pccard: card inserted, slot 0
Oct 8 01:45:45 /kernel: Mounting root from ufs:/dev/md0c
Oct 8 01:45:45 /kernel: ad0: 245MB <SanDisk SDCFH-256> [980/16/32] at ata0-master PIO4
Oct 8 01:45:45 /kernel: IP Filter: v3.4.31 initialized. Default = block all, Logging
= enabled
Oct 8 01:45:45 /kernel: IPsec: Initialized Security Association Processing.
Oct 8 01:45:45 /kernel: sio1: type 16550A
Oct 8 01:45:45 /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0
Oct 8 01:45:45 /kernel: sio0: type 16550A
Oct 8 01:45:45 /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
Oct 8 01:45:45 /kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Oct 8 01:45:45 /kernel: sc0: <System console> at flags 0x100 on isa0
Oct 8 01:45:45 /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem
0xa0000-0xbffff on isa0
Oct 8 01:45:45 /kernel: kbd0 at atkbd0
Oct 8 01:45:45 /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
Oct 8 01:45:45 /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on
isa0
Oct 8 01:45:45 /kernel: fdc0: cmd 3 failed at out byte 1 of 3
Oct 8 01:45:45 /kernel: fdc0: ready for input in output
Oct 8 01:45:45 /kernel: orm0: <Option ROMs> at iomem
0xc0000-0xc9fff,0xcc000-0xcd7ff,0xce000-0xcf7ff,0xd0000-0xd17ff,0xd2000-0xd37ff on
isa0
Oct 8 01:45:45 /kernel: ata1: at 0x170 irq 15 on atapci0
Oct 8 01:45:45 /kernel: ata0: at 0x1f0 irq 14 on atapci0
Oct 8 01:45:45 /kernel: atapci0: <Intel ICH ATA66 controller> port 0xf000-0xf00f at
device 31.1 on pci0
Oct 8 01:45:45 /kernel: isa0: <ISA bus> on isab0
Oct 8 01:45:45 /kernel: isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device
31.0 on pci0
Oct 8 01:45:45 /kernel: inphy3: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 8 01:45:45 /kernel: inphy3: <i82555 10/100 media interface> on miibus3
Oct 8 01:45:45 /kernel: fxp3: Ethernet address 00:90:27:76:f4:8a
Oct 8 01:45:45 /kernel: fxp3: <Intel Pro 10/100B/100+ Ethernet> port 0xcc00-0xcc3f
mem 0xd3300000-0xd33fffff,0xd3406000-0xd3406fff irq 5 at device 5.0 on pci1
Oct 8 01:45:45 /kernel: inphy2: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 8 01:45:45 /kernel: inphy2: <i82555 10/100 media interface> on miibus2
Oct 8 01:45:45 /kernel: fxp2: Ethernet address 00:90:27:8f:f0:de
Oct 8 01:45:45 /kernel: fxp2: <Intel Pro 10/100B/100+ Ethernet> port 0xc800-0xc83f
mem 0xd3200000-0xd32fffff,0xd3404000-0xd3404fff irq 11 at device 4.0 on pci1
Oct 8 01:45:45 /kernel: inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 8 01:45:45 /kernel: inphy1: <i82555 10/100 media interface> on miibus1
Oct 8 01:45:45 /kernel: fxp1: Ethernet address 00:90:27:a3:db:92
Oct 8 01:45:45 /kernel: fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xc400-0xc43f
mem 0xd3100000-0xd31fffff,0xd3402000-0xd3402fff irq 10 at device 3.0 on pci1
Oct 8 01:45:45 /kernel: inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
Oct 8 01:45:45 /kernel: inphy0: <i82555 10/100 media interface> on miibus0
Oct 8 01:45:45 /kernel: fxp0: Ethernet address 00:90:27:76:f3:e5
Oct 8 01:45:45 /kernel: fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xc000-0xc03f
mem 0xd3000000-0xd30fffff,0xd3407000-0xd3407fff irq 12 at device 2.0 on pci1
Oct 8 01:45:45 /kernel: pccard0: <PC Card 16-bit bus (classic)> on pcic0
Oct 8 01:45:45 /kernel: pcic0: TI12XX PCI Config Reg: [pwr save][CSC parallel isa irq]
Oct 8 01:45:45 /kernel: pcic0: <TI PCI-1410 PCI-CardBus Bridge> mem
0xd3400000-0xd3400fff irq 5 at device 1.0 on pci1
Oct 8 01:45:45 /kernel: pci1: <PCI bus> on pcib1
Oct 8 01:45:45 /kernel: pcib1: <Intel 82801AA (ICH) Hub to PCI bridge> at device
30.0 on pci0
Oct 8 01:45:45 /kernel: pci0: <Intel model 1132 VGA-compatible display device> at
2.0 irq 5
Oct 8 01:45:45 /kernel: pci0: <PCI bus> on pcib0
Oct 8 01:45:45 /kernel: pcib0: <Host to PCI bridge> on motherboard
Oct 8 01:45:45 /kernel: npx0: INT 16 interface
Oct 8 01:45:45 /kernel: npx0: <math processor> on motherboard
Oct 8 01:45:45 /kernel: Using $PIR table, 8 entries at 0xc00fdee0
Oct 8 01:45:45 /kernel: md1: Malloc disk
Oct 8 01:45:45 /kernel: md0: Preloaded image </mfsroot> 10485760 bytes at 0xc03fdbec
Oct 8 01:45:45 /kernel: Pentium Pro MTRR support enabled
Oct 8 01:45:45 /kernel: Preloaded mfs_root "/mfsroot" at 0xc0dff09c.
Oct 8 01:45:45 /kernel: Preloaded elf kernel "kernel" at 0xc0dff000.
Oct 8 01:45:45 /kernel: avail memory = 115068928 (112372K bytes)
Oct 8 01:45:45 /kernel: real memory = 133169152 (130048K bytes)
Oct 8 01:45:45 /kernel:
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,SSE>
Oct 8 01:45:45 /kernel: Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Oct 8 01:45:45 /kernel: CPU: Intel Pentium III (735.00-MHz 686-class CPU)
Oct 8 01:45:45 /kernel: Timecounter "i8254" frequency 1193182 Hz
Oct 8 01:45:45 /kernel: root at nb dot neon1 dot net:/usr/src/sys/compile/M0N0WALL_GENERIC
Oct 8 01:45:45 /kernel: FreeBSD 4.8-RELEASE #0: Sun Sep 28 16:35:22 CEST 2003
Oct 8 01:45:45 /kernel: The Regents of the University of California. All rights
reserved.
Oct 8 01:45:45 /kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991,
1992, 1993, 1994
Oct 8 01:45:45 /kernel: Copyright (c) 1992-2003 The FreeBSD Project.