[ previous ] [ next ] [ threads ]
 
 From:  "Bryan Kohlstedt" <bk at aventuremail dot com>
 To:  m0n0wall at lists dot m0n0 dot ch
 Subject:  Re: [m0n0wall] Can connect via PPTP but cannot see any remote computers
 Date:  Fri, 9 Jul 2004 21:56:56 +0100
That's exactly what the issue is.

I normally map by ip-    net use x: \\192.168.0.x\share name

Bryan

----- Original Message -----
From: "Chet Harvey" <chet at pittech dot com>
To: bk at aventuremail dot com
Cc: m0n0wall at lists dot m0n0 dot ch, aaron at digitalvideogroup dot com
Sent: Friday, July 09, 2004 05:42 PM
Subject: [m0n0wall] Can connect via PPTP but cannot see any remote computers

 Isn't the issue here that NetBIOS is non-routable so you wouldn't see them in 
 network neighborhood but you can still map by IP. Or if you do an LMHOST or a 
 WINS server. You can thank Microsoft for this issue.
 
 Quoting Bryan Kohlstedt <bk at aventuremail dot com>:
 
 > 
 > 
 > Is there a reason you need to use network neighborhood? The reason I ask is
 > what I usually do is to just use a net use command and map whatever drive I
 > need once I'm connected. I know this isn't a solution for every application.
 > 
 > I would say switch back to having your pptp clients and lan in the same ip
 > scheme and give mapping drives a try (if it's a valid solution for your
 > situation).
 > 
 > Bryan
 > 
 > ----- Original Message -----
 > From: "Aaron Tunnell" <aaron at digitalvideogroup dot com>
 > To: <m0n0wall at lists dot m0n0 dot ch>
 > Sent: Friday, July 09, 2004 11:15 AM
 > Subject: [m0n0wall] Can connect via PPTP but cannot see any remote computers
 > 
 >  Well I tried both suggestions.  I changed my VPN config to a new subnet in
 >  the 51 range.  And I created a LMHOSTS file on the XP client that mapped
 >  192.168.50.100 to the server.  But I still cant see anything on the remote
 >  network after I successfully connect.  Any more ideas?-Aaron
 >  
 >  Gateway Lan address 192.168.50.1
 >  DHCP range is 192.168.50.5-192.168.50.100
 >  My server VPN address is 192.168.51.101
 >  And my Client VPN assigned address is 192.168.51.144
 >  
 >  -----Original Message-----
 >  From: Zadikem, Travis-taz [mailto:tzadikem at picosecond dot com]
 >  Sent: Thursday, July 08, 2004 11:21 AM
 >  To: Aaron Tunnell; m0n0wall at lists dot m0n0 dot ch
 >  Subject: RE: [m0n0wall] Can connect via PPTP but cannot see any remote
 >  computers
 >  
 >  
 >  I had the same problem.  Do you have a wins server on the side that you
 >  can't see.  If not,
 >  you can just populate an LMHOSTS file on the windows XP as follows as an
 >  example:
 >  
 >  192.168.1.2	COMPUTERNAME	#PRE
 >  
 >  make sure you use tabs between the items.
 >  
 >  Travis
 >  
 >  
 >  
 >  
 >  -----Original Message-----
 >  From: Aaron Tunnell [mailto:aaron at digitalvideogroup dot com]
 >  Sent: Thursday, July 08, 2004 8:58 AM
 >  To: m0n0wall at lists dot m0n0 dot ch
 >  Subject: [m0n0wall] Can connect via PPTP but cannot see any remote
 >  computers
 >  
 >  
 >  I set up PPTP VPN according to the directions, below is my configuration on
 >  the Monowall box.  I can connect to my monowall from work via the built in
 >  WinXP client, but I cannot see any of my computers that are behind the
 >  monowall in network neighborhood.  Any idea why I can connect but cant see
 >  anything?  I set up the addresses as best I could figure, but I may have a
 >  conflict on my subnets.  So here is my config, any ideas?
 >  
 >  Gateway Lan address 192.168.50.1
 >  DHCP range is 192.168.50.5-192.168.50.100
 >  My server VPN address is 192.168.50.101
 >  And my Client VPN assigned address is 192.168.50.144
 >  
 >  The subnet at work where I am connecting form is in the 192.168.2.x range
 > is
 >  this a conflict with the above?  Thanks for any help!
 >  
 >  ---------
 >  Aaron Tunnell
 >  Digital Media Specialist
 >  Avid ACSR Windows | Unity
 >  Digital Video Group, inc.
 >  10049 Lickinghole Rd. - Suite A
 >  Ashland, VA 23005
 >  804-752-6650
 >  804-752-6651 fax
 >  aaron at digitalvideogroup dot com
 >  
 >  
 >  ---------------------------------------------------------------------
 >  To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
 >  For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
 >  
 >  
 >  ---------------------------------------------------------------------
 >  To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
 >  For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
 >  
 >  
 >  ---------------------------------------------------------------------
 >  To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
 >  For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
 > 
 > --------------------------

 > AventureHost.com - Worldwide Hosting - http://www.aventurehost.com
 > Sent from AventureMail.com, 2GB Free Email!
 > 
 > ---------------------------------------------------------------------
 > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
 > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
 > 
 > 
 
 
 -- 
 Chet Harvey
 Pitbull Technologies <http://www.pittech.com/> 
 Protecting your Digital Assets
 703.407.7311

--------------------------

AventureHost.com - Worldwide Hosting - http://www.aventurehost.com
Sent from AventureMail.com, 2GB Free Email!