[ previous ] [ next ] [ threads ]
 
 From:  Ryan Giobbi <rgiobbi at zoominternet dot net>
 To:  taharka <res00vl8 at alltel dot net>
 Cc:  "m0n0wall at lists dot m0n0 dot ch" <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] cant get traffic thru firewall - WAN setup problem?
 Date:  Tue, 13 Jul 2004 11:37:13 -0400
You would be correct, but I believe the Netgear ISDN router (something 
like this: 
http://www.neoseeker.com/Hardware/Products/Netgear_RT328_Router) should 
provide an ethernet interface.

taharka wrote:

>On Tue, 2004-07-13 at 10:36, Franz Lippi wrote:
>  
>
>>Hi,
>>I am a m0n0wall newbie, looks like a great product and comes with high 
>>recommodation, but I got stuck.....description of what I did so far:
>>
>>I have set up a computer w 2 NICs, tested them physically on the local 
>>lan side, works fine.
>>
>>this is my setup:
>>
>>ISP over ISDN dialin; I get the the same IP Adress at every dialin 
>>(MyWWWStatic IP ) , the netgear ISDN Router handles that
>>    |
>>-------------------------------
>>Ethernet to ISDN Router (Netgear RT338)     Router IP: 192.168.0.1
>>-------------------------------
>>    |
>>-------------------------------
>>Monowall NIC "WAN"   (setup: static IP adress (MyWWWStatic IP) w default 
>>gateway pointing to Netgear Router (192.168.0.1))
>>Monowall NIC "LAN", 192.168.0.25
>>-------------------------------
>>   |
>>---------------------------------------------
>>Local Network w PCs 192.168.0.10-35
>>---------------------------------------------
>>
>>WAN config:
>>I tried to put the WAN NIC to a static IP adress (MyWWWStatic IP) w 
>>default gateway pointing to Netgear Router (192.168.0.1)
>>I can access the webGUI over the Local LAN;
>>I put in rules for  WAN , TCP protokoll * * * * allow traffic, for  LAN 
>>proto *,  Source LAN-net, *  *  * allow traffic
>>
>>I thought this is a pretty forward setup, BUT I  CNAT BRING ANY TRAFIIC 
>>OVER THE FIREWALL.
>> 
>>Am I sitting on my brain or
>>has the fact that my IF to the ISP is a Eth 2 ISDN router something to 
>>do with it?
>>Do you have any ideas?
>> 
>>Grateful for help!!
>>Franz Lippi
>>    
>>
>
>Well, I'm sure I'll be corrected if I'm wrong but, AFAIK m0n0wall only
>works with DSL/Cable modems & was originally designed for DSL. No
>dial-up/ISDN support to date :-(
>
>taharka
>
>Lexington, Kentucky U.S.A.
>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>
>
>  
>