[ previous ] [ next ] [ threads ]
 
 From:  "Quark IT - Hilton Travis" <hilton at quarkit dot com dot au>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Zoom 5001 PCI Cable modem in a m0n0wall?
 Date:  Wed, 14 Jul 2004 22:21:29 +1000
Hi Kirk,

> -----Original Message-----
> From: Kirk Lane [mailto:ayocee at gmail dot com] 
> Sent: Wednesday, 14 July 2004 19:11
> To: m0n0wall at lists dot m0n0 dot ch
> Subject: Re: [m0n0wall] Zoom 5001 PCI Cable modem in a m0n0wall?
> 
> Okay, here's the results:
> With the cable modem installed:
> $ dmesg
> Copyright (c) 1992-2004 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 
> 1993, 1994
> 	The Regents of the University of California. All rights 
> reserved.
> FreeBSD 4.10-RELEASE #0: Sat May 29 16:25:59 CEST 2004
>     root at nb dot neon1 dot net:/usr/src/sys/compile/M0N0WALL_GENERIC
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: Pentium/P54C (133.27-MHz 586-class CPU)
>   Origin = "GenuineIntel"  Id = 0x52c  Stepping = 12
>   Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
> real memory  = 33554432 (32768K bytes)
> avail memory = 18235392 (17808K bytes)
> Preloaded elf kernel "kernel" at 0xc0e14000.
> Preloaded mfs_root "/mfsroot" at 0xc0e1409c.
> Intel Pentium detected, installing workaround for F00F bug
> md0: Preloaded image </mfsroot> 10485760 bytes at 0xc041264c
> md1: Malloc disk
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at 
> device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> pci0: <S3 Trio graphics accelerator> at 8.0
> pci0: <unknown card> (vendor=0x127a, dev=0x1803) at 9.0 irq 11
> pci0: <unknown card> (vendor=0x127a, dev=0x1804) at 9.1 irq 11

I dunno, but to me the above statement is quite obvious.

> fxp0: <Intel 82559 Pro/100 Ethernet> port 0x6300-0x633f mem 
> 0xe4000000-0xe40fffff,0xe4188000-0xe4188fff irq 10 at device 
> 11.0 on pci0
> fxp0: Ethernet address 00:90:27:d6:c6:ac
> inphy0: <i82555 10/100 media interface> on miibus0
> inphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> orm0: <Option ROMs> at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff 

... as are these.

--

Regards,

Hilton Travis                          Phone: +61 (0)7 3343 3889
(Brisbane, Australia)                  Phone: +61 (0)419 792 394
Manager, Quark IT                      http://www.quarkit.com.au
         Quark AudioVisual             http://www.quarkav.net

http://www.threatcode.com/ <-- its now time to shame poor coders 
into writing code that is acceptable for use on today's networks

War doesn't determine who is right.  War determines who is left.