[ previous ] [ next ] [ threads ]
 From:  Rainer Zocholl <UseNet dash Posting dash Nospam dash 74308 dash at zocki dot toppoint dot de>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Re: [m0n0wall] NE2000 ISA Howto?
 Date:  08 Aug 2004 20:10:00 +0200
eric at number13 dot com(Eric Garnice)  08.08.04 14:22

>> npx0: error reporting broken; using 387 emulator
>> isa0: <ISA bus> on motherboard
>> orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
>> pmtimer0 on isa0

>> fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on

>> isa0 ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
>> ata1 at port 0x170-0x177,0x376 irq 15 on isa0

>> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
>> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0

>> kbd0 at atkbd0

>> psm0: <PS/2 Mouse> irq 12 on atkbdc0
>> psm0: model Generic PS/2 mouse, device ID 0

>> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on

>> isa0 sc0: <System console> at flags 0x100 on isa0

>> sc0: VGA <16 virtual consoles, flags=0x300>

>> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
>> sio0: type 16550A

>> sio1: configured irq 3 not in bitmap of probed irqs 0

>> BRIDGE 020214 loaded
>> IPsec: Initialized Security Association Processing.
>> IP Filter: v3.4.33 initialized.  Default = block all, Logging =
>> enabled ata0-slave: ATAPI identify retries exceeded
>> ad0: 9MB <Generic 1234> [20/16/63] at ata0-master BIOSPIO

>Yeah, it found your NIC just fine.

Where do you see this?
Please copy/mark  the relevant line

>Unfortunately, you need two NICs for m0n0wall to work.

1. i only want to play^wtrain with the nice webinterface! ;-)
2. all services seems to start
3. Using VLAN i only need one NIC, or? (OK, not with NE2000 i assume..
   but why does it ask for VLAN? (It's only beta so that's easy to pardon))
4. Does m0n0wall not support PPP?
5. Why does it not display at least the first card?

Shouldnt' here something with "ed" have occured?