Bad idea: to allow outside access to the GUI directly.. very bad..

Ok replacement idea: setup the VPN server in m0n0wall and make a VPN 
connection each time you need to reconfig, then you can access the webgui as 
if you're inside LAN.

-Rob

----- Original Message ----- 
From: "Eric Gregory" <eric at gatewayconnections dot com>
Cc: <m0n0wall at lists dot m0n0 dot ch>
Sent: Thursday, August 12, 2004 1:06 PM
Subject: [m0n0wall] Reach web Interface


>I have a monowall up and running.  Outside interface is xxx.xxx.xxx.233 
>public IP with a 255.255.255.240 and inside is 192.168.0.1 with a 
>255.255.255.0 netmask.  everything is working great except that if I try to 
>reach the webgui which is running https from outside the network I can't 
>get to it.  Is there a change that needs to be made in the firewalls or 
>something.  I need to be able to do this from outside since I'm looking at 
>putting Monowall in several remote locations and will need to administer 
>from my home office.
>
> Any help is appreciated.
>
> Thanks
> ERic
>
>
>
> Andrew Greenwood wrote:
>
>>I recently downloaded the latest beta of m0n0wall, but am unable to 
>>upgrade
>>my existing one (b16) using the firmware upgrade page. It claims the image
>>file is corrupt on the first attempt, and then on the second attempt 
>>reboots
>>to its existing version.
>>
>>Any ideas?
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
>>For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>>
>>
>>
>>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
>
>