|
||||||||
After running the std harddrive (PC) version for almost 24 hours the machine totally locks up (cant' even NumLock/Capslock) however the CD rom version of b17 works great for ever. This is repeatable every night. I'm instrested in helping get this addressed (If it's not just me) * CPU: Cyrix 6x86 (486-class CPU) 166 <-> 233mhz not sure * <Intel PIIX3 ATA controller> Cyrix have any problems with ATA under FreeBSD? -Pat Here is a hardware descripion (without the HD in the system) it's a Maxtor 4.0g HD Aug 15 17:57:11 firewall /kernel: FreeBSD 4.10-RELEASE #0: Fri Aug 6 13:24:25 CEST 2004 Aug 15 17:57:11 firewall /kernel: Timecounter "i8254" frequency 1193182 Hz Aug 15 17:57:11 firewall /kernel: CPU: Cyrix 6x86 (486-class CPU) Aug 15 17:57:11 firewall /kernel: Origin = "CyrixInstead" DIR=0x1731 Stepping=1 Revision=7 Aug 15 17:57:11 firewall /kernel: real memory = 134217728 (131072K bytes) Aug 15 17:57:11 firewall /kernel: avail memory = 115220480 (112520K bytes) Aug 15 17:57:11 firewall /kernel: Preloaded elf kernel "kernel" at 0xc0ed5000. Aug 15 17:57:11 firewall /kernel: Preloaded mfs_root "/mfsroot" at 0xc0ed509c. Aug 15 17:57:11 firewall /kernel: md0: Preloaded image </mfsroot> 10485760 bytes at 0xc04d39e8 Aug 15 17:57:11 firewall /kernel: md1: Malloc disk Aug 15 17:57:11 firewall /kernel: npx0: <math processor> on motherboard Aug 15 17:57:11 firewall /kernel: npx0: INT 16 interface Aug 15 17:57:11 firewall /kernel: pcib0: <Host to PCI bridge> on motherboard Aug 15 17:57:11 firewall /kernel: pci0: <PCI bus> on pcib0 Aug 15 17:57:11 firewall /kernel: isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0 Aug 15 17:57:11 firewall /kernel: isa0: <ISA bus> on isab0 Aug 15 17:57:11 firewall /kernel: atapci0: <Intel PIIX3 ATA controller> port 0xf000-0xf00f at device 7.1 on pci0 Aug 15 17:57:11 firewall /kernel: ata0: at 0x1f0 irq 14 on atapci0 Aug 15 17:57:11 firewall /kernel: ata1: at 0x170 irq 15 on atapci0 Aug 15 17:57:11 firewall /kernel: pci0: <S3 ViRGE graphics accelerator> at 17.0 irq 10 Aug 15 17:57:11 firewall /kernel: pci0: <unknown card> (vendor=0x168c, dev=0x0007) at 18.0 irq 11 Aug 15 17:57:11 firewall /kernel: rl0: <RealTek 8139 10/100BaseTX> port 0x6100-0x61ff mem 0xe4010000-0xe40100ff irq 9 at device 19.0 on pci0 Aug 15 17:57:11 firewall /kernel: rl0: Ethernet address: xx:xx:xx:xx:xx:xx <-snip Aug 15 17:57:11 firewall /kernel: miibus0: <MII bus> on rl0 Aug 15 17:57:11 firewall /kernel: rlphy0: <RealTek internal media interface> on miibus0 Aug 15 17:57:11 firewall /kernel: rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Aug 15 17:57:11 firewall /kernel: rl1: <RealTek 8139 10/100BaseTX> port 0x6200-0x62ff mem 0xe4011000-0xe40110ff irq 12 at device 20.0 on pci0 Aug 15 17:57:11 firewall /kernel: rl1: Ethernet address: xx:xx:xx:xx:xx:xx <-snip Aug 15 17:57:11 firewall /kernel: miibus1: <MII bus> on rl1 Aug 15 17:57:11 firewall /kernel: rlphy1: <RealTek internal media interface> on miibus1 Aug 15 17:57:11 firewall /kernel: rlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto Aug 15 17:57:11 firewall /kernel: orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0 Aug 15 17:57:11 firewall /kernel: pmtimer0 on isa0 Aug 15 17:57:11 firewall /kernel: fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 Aug 15 17:57:11 firewall /kernel: fdc0: FIFO enabled, 8 bytes threshold Aug 15 17:57:11 firewall /kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0 Aug 15 17:57:11 firewall /kernel: atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 Aug 15 17:57:11 firewall /kernel: atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 Aug 15 17:57:11 firewall /kernel: kbd0 at atkbd0 Aug 15 17:57:11 firewall /kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 Aug 15 17:57:11 firewall /kernel: sc0: <System console> at flags 0x100 on isa0 Aug 15 17:57:11 firewall /kernel: sc0: VGA <16 virtual consoles, flags=0x300> Aug 15 17:57:11 firewall /kernel: sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 Aug 15 17:57:11 firewall /kernel: sio0: type 16550A Aug 15 17:57:11 firewall /kernel: sio1 at port 0x2f8-0x2ff irq 3 on isa0 Aug 15 17:57:11 firewall /kernel: sio1: type 16550A Aug 15 17:57:11 firewall /kernel: BRIDGE 020214 loaded Aug 15 17:57:11 firewall /kernel: IPsec: Initialized Security Association Processing. Aug 15 17:57:11 firewall /kernel: IP Filter: v3.4.33 initialized. Default = block all, Logging = enabled Aug 15 17:57:11 firewall /kernel: acd0: CDROM <TOSHIBA CD-ROM XM-6702B> at ata0-master PIO4 Aug 15 17:57:11 firewall /kernel: Mounting root from ufs:/dev/md0c Aug 15 17:57:12 firewall dnsmasq[76]: started, version 1.18 cachesize 150 Aug 15 17:57:12 firewall dnsmasq[76]: read /etc/hosts - 36 addresses Aug 15 17:57:12 firewall dnsmasq[76]: reading /etc/resolv.conf Aug 15 17:57:12 firewall dnsmasq[76]: using nameserver xx.x.xx.x#53 <-snip Aug 15 17:57:12 firewall dhcpd: Internet Software Consortium DHCP Server V3.0.1rc11 Aug 15 17:57:12 firewall dnsmasq[76]: using nameserver 192.168.10.10#53 Aug 15 17:57:12 firewall dhcpd: Copyright 1995-2003 Internet Software Consortium. Aug 15 17:57:12 firewall dnsmasq[76]: reading /var/db/dhcpd.leases Aug 15 17:57:12 firewall dhcpd: All rights reserved. Aug 15 17:57:12 firewall dhcpd: For info, please visit http://www.isc.org/products/DHCP Aug 15 17:57:12 firewall mpd: mpd: pid 89, version 3.18 (root at nb dot neon1 dot net 13:08 6-Aug-2004) Aug 15 17:57:12 firewall mpd: [pt0] ppp node is "mpd89-pt0" Aug 15 17:57:12 firewall mpd: mpd: local IP address for PPTP is 0.0.0.0 -----Original Message----- From: Chris Olive [mailto:chris at technologEase dot com] Sent: Sunday, August 15, 2004 11:20 PM To: Andrew Greenwood Cc: m0n0wall at lists dot m0n0 dot ch Subject: Re: [m0n0wall] Cannot upgrade firmware Andrew Greenwood wrote: >I recently downloaded the latest beta of m0n0wall, but am unable to upgrade >my existing one (b16) using the firmware upgrade page. It claims the image >file is corrupt on the first attempt, and then on the second attempt reboots >to its existing version. > >Any ideas? > > > > I'm getting the exact same thing. Hopefully Manuel and/or someone else will jump in and answer. I'm trying to go from v1.0 stable to 1.17beta. I don't want to have to flash the CF manually... -chris --------------------------------------------------------------------- To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch |