This WRAP is bought from PC Engines in Schwitzerland and im not sure if they
have made the board themself or bought them from taiwan? I guess I have to
mail they guy I bought it from and ask him.
I have another thread about no carrier for WAN. Does this problem as the
----- Original Message -----
From: "Banda" <banda underscore mlmono at net dot hr>
To: <m0n0wall at lists dot m0n0 dot ch>
Sent: Monday, September 06, 2004 10:41 AM
Subject: Re: [m0n0wall] Problems with switch
> there are problems with some WRAP devices (latest branch, manufactered in
> taiwan). Please see more details about this issue here:
> In short, you need to send WRAP for a replacement or do the hardware fix
> go wireless,
> ----- Original Message -----
> From: "Patrik" <paake at telia dot com>
> To: <m0n0wall at lists dot m0n0 dot ch>
> Sent: Monday, September 06, 2004 10:02 AM
> Subject: [m0n0wall] Problems with switch
> I have searched the list archive but havent find a solution. Im running
> m0n0wall on a WRAP and it works good if I connect it directly to a PC with
> cross-over cable. My switch is a DLINK DES-1005D. Datasheet here:
> http://126.96.36.199/products/des-1005d.pdf Note that the image in the
> is not correct. It looks different.
> If I connect m0n0wall to the switch the led on the switch which
> to m0n0wall starts flicker repeatadly although no action is shown on the
> on the WRAP, just the one saying that the link is up, but the other led is
> turned off.
> The led on the switch flickers even if I only have m0n0wall connected to
> switch alone. I have tried with different length of the cables, as Manuel
> suggested in an earlier thread. It seems it does work with both
> and straight from m0n0 to switch as the led is turned on in both cases,
> maybe my switch as the capability to know which pair to use.
> The switch does work and is not broken!
> To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch