[ previous ] [ next ] [ threads ]
 
 From:  "Terry Miller" <terry at millfam dot org>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  RE: [m0n0wall] Unable to ping DMZ hosts from LAN
 Date:  Tue, 7 Sep 2004 11:18:30 -0500
Is the machine in the dmz set to use monowall as the default gateway and
respond to pings?
Do the firewalls allow telnet and ICMP?

I was just burned on step 1 last week.



-----Original Message-----
From: Rodman Frowert [mailto:frowertr at i dash 1 dot net] 
Sent: Tuesday, September 07, 2004 10:34 AM
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: [m0n0wall] Unable to ping DMZ hosts from LAN


Hey guys,

I looked through the archives and didn't find any answers I thought would be

beneficial to me so I thought I would ask.  I can't seem to ping anything in

the DMZ (other than my m0n0 DMZ interface) from my LAN.  Now I can ping DMZ 
hosts from the m0n0 GUI, however.

Is there something that is set that is preventing me from talking to DMZ 
hosts from my LAN?  I only have one LAN rule and it is the default rule that

was enabled with m0n0 was installed:  Default LAN --> any.  The DMZ rules I 
have set apply to what can come out of the DMZ only because this is my 
hotspot.

I would like to eventually put a webserver in my DMZ, so you can imagine I 
at least need telnet access to the machine from my LAN.

My LAN is 192.168.1.x/24
My DMZ is 10.10.10.x/24

What am I missing?  Am I going to have to bridge these two to do what I want

to do?

Rodman





---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch