[ previous ] [ next ] [ threads ]
 
 From:  "Rene Heinze" <rene dot heinze at hup dot de>
 To:  <m0n0wall at lists dot m0n0 dot ch>
 Subject:  Setup Problem with M0n0wall 1.1
 Date:  Wed, 8 Sep 2004 14:36:17 +0200
Hi,

i just burned M0n0wall 1.1 to a CD-R and booted from the CD-R on a
Celeron@333Mhz with two 3COM NICs inside. I want to use M0nowall as a = LAN
Firewall between two different LANs. Both NICs are connected to a D-LINK
switch. The other clients on the switch use the 194.77.59.0/24 IP range. = I
setup the LAN and the WAN Ports using the m0n0wall console setup. The =
setup tool found both NICs. I assigned one for the LAN and one for the WAN.
I configured 194.77.59.99 for the LAN IP adress.
Unfortunatly I=B4am not able to ping the m0n0wall on 194.77.59.99 = neither
am I able to access the webGUI on http://194.77.59.99/.=20

What am I doing wrong?=20


Thanks

Regards
Rene