[ previous ] [ next ] [ threads ]
 
 From:  "C. Falconer" <cfalconer at avonside dot school dot nz>
 To:  'sylikc' <sylikc at gmail dot com>, 'Dennis' <dh at hinet dot dk>
 Cc:  m0n0wall at lists dot m0n0 dot ch
 Subject:  RE: [m0n0wall] Multiple subnets on the LAN interface
 Date:  Fri, 24 Sep 2004 10:34:22 +1200
Doesn't seem like an unusual thing to do...  I do hope that suggestions like
this make it onto the wishlist somehow ?

Similarly due to ISP topology, I need the ability to add a static route out
the WAN port.



-----Original Message-----
From: sylikc [mailto:sylikc at gmail dot com] 
Sent: Friday, 24 September 2004 10:20 a.m.
To: Dennis
Cc: m0n0wall at lists dot m0n0 dot ch
Subject: Re: [m0n0wall] Multiple subnets on the LAN interface


Dennis,

> I have 4 subnets on my LAN interface, so I am unfortanly not able to 
> use m0n0wall in our production enviroment (m0n0wall firewall rules 
> management etc.). Are there any upcoming plans to implement this 
> feature, so it is possible to have more than one subnet on the LAN 
> interface?

I haven't necessarily played with this feature yet, but I think you can use
m0n0's VLAN capability to do some trunking and support the 4 subnets that
you have by putting a managed switch that supports the VLAN trunking.

See http://m0n0.ch/wall/hardware.php for the list of cards that will do
VLANing in m0n0.

An alternative to that is to just stick 4 NIC cards on the m0n0 and go from
there ;)


/sylikc

---------------------------------------------------------------------
To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch