Jeremy,
Try turning off WEP and see if you can get an IP, I have only seen this with
WEP enabled, my laptop works fine as long as WEP is off. I've tested this on
several builds and have never got a lease when WEP is on.

Dave

> -----Original Message-----
> From: Jeremy [mailto:Mr dot Jeremy at verizon dot net] 
> Sent: Tuesday, September 28, 2004 4:58 PM
> To: james at mckeand dot biz; 'David Kitchens'
> Cc: m0n0wall at lists dot m0n0 dot ch
> Subject: RE: [m0n0wall] DHCP on opt1
> 
> Yes, this is the same setup I'm using. Even if I connect my 
> laptop to the
> OPT1 (WLAN) interface, I cannot receive a IP address, but I 
> can from the LAN NIC.
> 
> -----Original Message-----
> From: james at mckeand dot biz [mailto:james at mckeand dot biz]
> Sent: Tuesday, September 28, 2004 8:59 AM
> To: David Kitchens; 'Jeremy'
> Cc: m0n0wall at lists dot m0n0 dot ch
> Subject: RE: [m0n0wall] DHCP on opt1
> 
> I believe, WEP and DHCP running on a wifi interface on m0n0 
> is a known issue. But this is not the issue here.
> 
> I am not running hostap on my m0n0. I am running a separate 
> AP (cheap Belkin). Once entered the key in my WEP settings on 
> the laptop I was able to talk to the AP and get an IP from my 
> m0n0. I believe Jeremy is using a similar setup (correct me 
> if I'm wrong) - he mentioned that he has a 3rd ethernet.
> 
> _________________________________
> James W. McKeand
> 
> ----- Original Message -----
> From: "David Kitchens" <spider at webweaver dot com>
> Date: Tue, 28 Sep 2004 00:10:10 -0400
> To: "'James W. McKeand'" <james at mckeand dot biz>,"'Jeremy'"
> <Mr dot Jeremy at verizon dot net>
> Subject: RE: [m0n0wall] DHCP on opt1
> 
> > Once again, the WEP issue appears, this IS an issue that 
> needs to be 
> > addressed. To state the problem simply once again, turning WEP on 
> > negates the ability to receive an IP from DHCP. I have tried for 
> > months now to put this issue on the table but its been sporadic in 
> > user complaints. I think
> by
> > now, many users have seen this problem and if I had the 
> ability to dig
> into
> > the image, I would do so gladly but I'm no BSD guru. I use 
> a Soekris 
> > 4511
> at
> > home and am planning on deploying several hotspots in my 
> town soon. I
> would
> > like to see some work on this problem and I would be happy to do any
> testing
> > on my home unit if someone can tell me where to start.
> > 
> > Dave
> > 
> > > -----Original Message-----
> > > From: James W. McKeand [mailto:james at mckeand dot biz]
> > > Sent: Monday, September 27, 2004 9:56 AM
> > > To: 'Jeremy'
> > > Cc: m0n0wall at lists dot m0n0 dot ch
> > > Subject: RE: [m0n0wall] DHCP on opt1
> > > 
> > > I initially had problems not getting an IP from my OPT1 DHCP 
> > > interface from a wireless client. My problem was that I 
> had enabled 
> > > WEP (my only option on my AP) and the client was not 
> connecting to 
> > > the AP. Once that was resolved, I got an IP from my m0n0 and 
> > > everything worked.
> > > 
> > > Are your wireless clients connecting to the AP? Try 
> setting up the 
> > > AP on the LAN side just for testing...
> > > 
> > > Can you connect a wired client to the OPT1 interface on 
> the m0n0 and 
> > > get an IP? It should be a separate subnet.
> > > 
> > > I think the only difference to your config is that I only 
> have DHCP 
> > > running my Opt1 interface, not my LAN interface.
> > > 
> > > _________________________________
> > > James W. McKeand
> > > 
> > > 
> > > -----Original Message-----
> > > From: Jeremy [mailto:Mr dot Jeremy at verizon dot net]
> > > Sent: Sunday, September 26, 2004 1:27 AM
> > > To: m0n0wall at lists dot m0n0 dot ch
> > > Subject: [m0n0wall] DHCP on opt1
> > > 
> > > I am trying to run a Monowall firewall so that users on 
> the wireless 
> > > network have to use VPN to connect. I have 3 ethernet cards 
> > > installed in the computer and monowall installed. The 3rd network 
> > > card is set as opt1 and has DHCP server turned on (as 
> does the LAN 
> > > one) but I cannot seem to get a DHCP lease from it. I can 
> only get 
> > > an IP from the LAN NIC. Is there some step I'm missing?
> > > 
> > > 
> > > 
> > > 
> ---------------------------------------------------------------------
> > > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> > > 
> > > 
> > 
> > 
> > 
> > 
> ---------------------------------------------------------------------
> > To unsubscribe, e-mail: m0n0wall dash unsubscribe at lists dot m0n0 dot ch
> > For additional commands, e-mail: m0n0wall dash help at lists dot m0n0 dot ch
> > 
> 
> 
> 
>